Introduction Welcome to the Third Edition of Tyco Safety Product’s Fire Product Catalogue of product available from our Letchworth UK Distribution Centre. We aim to make your product range as comprehensive as possible to ensure you never need go anywhere else. To meet this goal, our product specialists, with your help, have selected the most appropriate, cost effective product range all available for next day delivery.
Table of Contents 3 15 23 36 39 41 44 48 49 53 54 55 59 62 67 69 72 74 80 84 87 88 90 92 93 98 Page 2 Addressable Fire Systems - LPCB Approved Addressable Fire Systems - UL/FM Approved Conventional Fire Alarm Panels - BS5839 & EN54 Conventional Marine Panels Batteries, PSU & Door Release Units Addressable 900 Series Detectors Conventional 600 Series Detectors Standard Detector Bases Functional Detector Bases M600/900 Detector Ancillaries Duct Probe Air Sampling Aspirating Smoke Detectors VESDA Visions S
Addressable Fire Systems - LPCB ThornGraph Introduction ThornGraph is a combined text and graphics system which provides a window through which the status of all MINERVA fire controllers connected to ThornNet can be monitored and controlled. ThornGraph has been designed with clear displays and simple controls which can be quickly and easily understood by an operator rather than an engineer. The system is designed to be used with a touch screen or mouse and does not require the use of a Qwerty keyboard. P.
ThornNet ThornNet provides a true peer to peer communications interface for up to 62, MINERVA 8, MINERVA 16E or MINERVA 80 fire controllers in any combination and the ThornGraph, graphical user interface. The units can be inter-connected into a large network without the need for a host or master controller. ThornNet is based upon a combination of hardware and software that allows MINERVA fire controllers (Nodes) to be linked together.
MINERV A Analogue Addressable Fire Controllers MINERVA is a comprehensive and reliable range Marine approved with various other international of networkable analogue addressable fire cross listings. controllers with over 60,000 installations worldwide. MINERVA complies with BS5839 Pt 4 and can be installed to BS5839 Pt. 1.
MINERVA 8-16E -T891 - Functional Schematic MINERVA 80- T890 - Functional Schematic Page 6
MINERVA Repeaters The MINERVA fully functional repeaters are available for all models of the MINERVA series controllers. The repeaters are LPCB approved and offer the same control and monitoring facilities as the main panel. Each repeater includes one MPIM Module and up to seven repeaters can be attached to the remote bus of the main panel. The technical specification for the repeater is the same as the main panel shown on the previous page, product codes are also shown there.
AC Power Module (ACPM) Storage Temp: Humidity: The AC Power Module [ACPM] is common to all MINERVA addressable models and supplies power to all the PCBs and other devices fitted. It contains an integral battery charger which continuously charges back-up batteries. These are required to supply the system in the event of a mains failure, in order to comply with the requirements of BS 5839 Part 1 [1988]. Addressable versions of the ACPM are available.
Desktop Printer The printer is designed as a low cost business printer ideally suited for mounting adjacent to the fire control panel.The LQ-300+ combines high performance with paper handling flexibility and quiet operation. Features • 300 cps draft/ 90 cps LQ.
Housings MINERVA panels are supplied with a housing. Matching dawn grey housings are available for housing other equipment along side the MINERVA panel. The general purpose housing is available in surface and flush models with matching diecast door. Other housing options include the terminal chamber PCB which provides neat terminations for addressable loop field wiring.
MINERV A Addressable Modules An extensive range of ancillary modules has been specifically designed for use with the MINERVA 8, 16E and 80 range of Fire Control Panels. The M520 range of ancillary modules provide the MINERVA Panel with a wide degree of systems application flexibility. This allows the field addressable loop from the control panel to both receive inputs to the system and control outputs from it.
DM520 - Conventional Detector Module The DM520 is used to interface a single zone of conventional detectors onto the MINERVA analogue addressable loop. This provides a cost effective and easy method of extending existing conventional systems or a future upgrade path for new conventional systems. The DM520 is also fitted with a red LED to indicate locally when the associated conventional zone has entered an alarm condition. The DM520 requires a separate 24V d.c. supply to operate.
LPBD521 - Loop Powered Beam Detectors The LPBD521 module is used to drive the FireRay 2000 beam detector units directly from the MINERVA loop. A single LPBD521 can be used to power the analyser unit, the beam receiver unit and the transmitter unit. Alternatively, two separate LPBD521's can be used with one to power the analyser unit and receiver units and the second to drive the transmitter separately, either from the same loop or a different loop. Up to 8 LPBD521's can be used per loop.
SU521 - Shop Interface Module The SU251 is an addressable, multi input/output device that is used to interface other fire or security systems into the MINERVA control panel. Inputs can be used for taking signals from other systems (e.g. taking individual shop security systems into the central shopping centre system) whilst the outputs can be used to send control signals from the MINERVA back to the individual tenant's system.
Addressable Fire Systems - UL/FM Approved Analogue Addressable TFX-400 Series TFX400 The AUTOCALL TFX-400 is a self contained, small addressable panel in a single cabinet. The AUTOCALL TFX-400 includes 2 analogue, addressable signalling line circuits that provide 99 points each. The AUTOCALL TFX-400 uses proven technology, used in the TFX-500M and TFX-800M fire alarm and detection systems.
Remote Operator Control Panel The Remote Operator Control Panel (remote OCP) is designed for use with the AUTOCALL TFX series systems to provide system operating controls at a remote location. The unit is suitable for mounting in lobbies, vestibules or anywhere were space is a premium. Three configurations are available and each are housed in small, attractive units, finished in red with a black faceplate. Each configuration is suitable for indoor semiflush or indoor surface mounting.
Power Supplies Features - DCPM . Converts 24Vd.c. to voltages required by the TFX family 976122 The AUTOCALL Power supplies (models RPS-424 and DCPM) are solid state electronic power supplies which provide filtered regulated DC power to the AUTOCALL TFX series fire alarm system. The RPS-424 converts 120Va.c. primary power to 24Vd.c., 5Vd.c. and 15Vd.c. The DCPM converts 24Vd.c. power from the RPS-424 to the supply voltages necessary for the TFX family.
Multi Purpose Interface Module The AUTOCALL Multi Purpose Interface Module (MPIM) is the communication interface between the AUTOCALL TFX control panel and certain remote system functions. MPIMs communicate with the main processor module through the system’s local or remote (RS485) bus. Each MPIM module is assigned a unique bus address by means of programming jumpers. The MPIM mounts in the AUTOCALL TFX panel enclosure, a local or remote AUTOCALL TFX display panel enclosure, or a suitable listed enclosure.
Technical Specification Dimensions Operating Temperature Operating Humidity Input Voltage from MPIM Input Current Output Current per LED Output Current per output (not current limited) IAA-16 141H x 84W x 18.5D mm 0 to +50oC 85% Non-Condensing 5Vd.c. 11mA plus 5mA (per active input) - OAA-16 141H x 84W x 18.5D mm 0 to +50oC 85% Non-Condensing 5Vd.c. 11mA plus 10mA (per active output) 10mA - OMA-80 231H x 188W x 12.5D mm 0 to +50oC 85% Non-Condensing 5Vd.c.
AUTOCALL CAA-500LI Module The AUTOCALL CAA-500LI module is used only with the AUTOCALL TFX fire control panels to detect and isolate short circuits. This module should be installed between groups of addressable devices to prevent failure of the entire signalling circuit loop in the event of a short circuit. Upon detection of a short circuit, this module opens up the positive leg of the signalling circuit.
OXA-502RM - Addressable Relay Module The AUTOCALL OXA-502RM module provides a form C relay contact for annunciation and auxiliary control purposes with the AUTOCALL TFX series fire alarm system. Both are monitored and controlled as an addressable device on an AUTOCALL TFX system signalling line circuit. The relay contact may be programmed to operate in conjunction with any single or group of input events. Each relay monitor module uses one of 126 available addresses on the AUTOCALL TFX signalling circuit.
Pullstations & Ancillaries Hazardous Locations The RMS series of pull stations are constructed of high strength metal die cast alloy. The UL rating of Class I Group B (Hydrogen) C & D, Class II Groups E, F, G, Class III and outdoor rating of type 4X, allows these stations to offer unmatched placement flexibility. The terminal block connections, D.P.D.T contacts @ 10 amps meet most electrical requirements. Having a ‘conventional’ pull station design the RMS series stations offer easy identification.
Conventional Fire Alarm Panels - BS5839 and EN54 CB200 (Conventional Control Panel) termination. The surface-mount electronics motherboard is fitted and terminated after the first fix installation and finally a terminal cover completes the panel installation. Enhancement Enclosures 2500/220 Enclosure c/w 1A PSU & space for 4 x C1437 and 2 x C1466 & 6.2AH battery set. Cabinet size - 380H x 600W x 210D mm. Panels are boxed complete with a three-sticker set allowing user selection and application on site.
System 1700 (Conventional Control Panel) A uniquely flexible series of basic fire controllers. Covering 4 or more zones of fire detection and suitable for cost effective protection in a wide range of building types. Detection, display, alarm, and extinguishing control, can be tailored to meet any need.
Four or Eight Zone Module with Display This module provides the power to each detection zone which respond to four conditions, open-circuit fault, quiescent, alarm or short-circuit fault. Individual indication is given for either Alarm or Fault. Each zone has a corresponding output which is energised in an alarm condition and is suitable for driving zonal relays and/or auxiliary modules i.e. multiplexed repeater. 508.014.023 1700 4 Zone PCB & Display 508.014.
Multiplex Transmitter Module This module transmits up to 16 independent signals plus common alarm or fault to up to 4 multiplex receiver modules at remote locations over a pair of signal wires (max. length 1 Km). Product Code 508.014.029 1700 Multiplex TX PCB Multiplex Receiver Module This module receives and encodes the signals from a multiplex transmitter module. The outputs can be used to drive either a Repeater display module, Mimic indicators etc. Product Code 508.014.
Coincidence Module This module is designed to activate one or both relays in response to an alarm condition from up to eight zonal outputs. This module is primarily used in conjunction with the extinguishing module, but may also be used for other applications. Product Code 508.014.048 1700 Coincidence Module PCB Housings Technical Specification Thorn 508.014.011.T 508.014.013.
NT100 Conventional Controllers Standard Fire Control Panel Country NT108 U.K. Spain Belgium 508.022.008 508.022.009 Holland The range of NT100 panels are state-of-the-art intelligent fire panels, which provide many of the features normally only found on more expensive analogue addressable panels. The range of control panels are LPCB approved to EN54Pt. 2 and 4 and include many local approval authorities around the world. The panels are supplied in 8 and 16 zone versions.
509.022.004 NTX-02 16 Way Relay Output Board (24Vd.c.@1A) Requires NTX-01 Expansion Board 509.022.005 NTX-03 16 Way Digital Output Driver Board Requires NTX-01 Expansion Board 509.022.003 NTX-01 4 Way Expansion Board - Supplied Fitted to the NTF And NTR Controllers. Also Supports NTX-02,03,04 Expansion Boards 509.022.006 NTX-04 16 Way Digital Input Board for use on Special NT Controller Variants only 509.022.
NTR - Typical Wiring Schematic for Single Area P anels PRESSURESWITCHES Typical Extinguishing Gas Release Applications Extinguishant Schematic Configuration with Extinguishant Solenoid Extinguishant Schematic Configuration with Pilot Container Solenoid Extinguishant Initial/Reserve Schematic with Pilot Container Solenoid Extinguishant Initial/Reserve Schematic with Extinguishant Solenoid Page 30
MXCE Conventional Fire Detection & Extinguishing Controller • Terminations that suit up to 2.5mm2 CSA cable Power Supply The power supply is designed to comply with the latest standard (EN54 pt4). The internal mains PSU provides all power plus charging and monitoring of the 2 x 12V lead acid batteries (up to 7 Ah). • 1.
Prescient (Conventional Extinguishing Controllers) switch settings. Two fully monitored actuator/solenoid circuits, each rated at 1A, operate simultaneously upon “extinguishant release”. The panel can be operated in either automatic mode or manual mode. In the manual mode, the detection circuits will continue to operate, giving first stage alarms and signals to ancillary equipment, but will not automatically actuate the extinguishing systems.
T510 Extinguishant Changeover Unit The T510 is a manual keyswitch operated unit for use on extinguishing systems. The unit allows manual changeover between MAIN and RESERVE cylinder banks and includes an OFF position that disables the operation of the solenoids. The T510 also provides a fault relay, which monitors the solenoid and solenoid wiring. The T510 is provided with 2 keys. Technical Specification Input power supply: 24Vd.c.
T526 HOLD & T529 ABORT Switch Unit The T526 and T529 are large mushroom head robust push buttons for use on any extinguishing release system, although integral resistors are fitted to suit T520, T530 and NTR panels. The switch is double pole for maximum reliability. These switches can be surface or flush mounted using standard UK style single gang electrical back boxes. Operation will vary according to the panel used.
Weatherproof Extinguishing Indicator Units 540.007.001 E1 Single Red lamp unit Heavy Duty IP67 Cast Aluminium Surface Mount Lamp Unit. Single 24V d.c. red lamp labelled 'Extinguishing System Operated' Technical Specification Dimensions: H(mm) W(mm) E1 100 100 D(mm) 115 E3 I3 I4 115 75 75 300 230 230 100 75 75 540.007.002 E3 Red/Amber/Green lamp unit Heavy Duty IP67 Cast Aluminium Surface Mount Lamp Unit Three 24Vd.c.
Conventional Marine Panels T1000 Marine Fire Controller The range of T1000 panels are state-of-the-art intelligent fire panels, which provide many of the features normally only found on more expensive analogue addressable panels. The panels are supplied in 8 and 16 zone versions. Each detection zone can support up to 32 conventional detectors. The user interface is provided through a combination of LEDs and a 2 x 40 character LCD display.
Precept Marine Fire Controller fire condition and latch until reset. One nonlatching changeover relay contact operates on any fault condition. Zero volt open collector outputs are provided for zonal fire conditions and common fault. Three normally open inputs provide for remote evacuate, silence alarms and reset control. 2500/758 Precept Marine 16 zone control panel Lloyds approved to ENV 1&2. Uses ship’s own primary & secondary 24V DC supplies. Space for 6.2Ah S.L.A battery set (2 x 12V).
T680 Marine Power Change Over Unit The T680 power changeover unit derives power for the T880 and T881 control panels. The unit takes primary power from the ship's AC supply and provides a standby supply from the ship's 24Vd.c. system i.e. the unit does not charge any internal batteries. The T680 unit provides a smooth changeover from primary to secondary supply and vice-versa. It signals main and standby supply failure signals to the T88x control equipment.
Batteries, PSU and Door Release Units Batteries Product Codes 660.001.003 Battery sealed L-A 560.001.013 Battery sealed L-A replaces parts 3145 and 30102 3085 Battery sealed L-A replaces 660.001.014 and 30-111 3010 Battery sealed L-A replaces 660.001.007, SLA21 and 30-103 3071 Battery sealed L-A replaces 660.001.009 and 30105 660.002.010 Battery sealed L-A replaces 3146, SLA04 and 30112 3072 Battery sealed L-A replaces 660.001.005, SLA07 and 30-101 660.002.
Door Release Units Technical Specification - Product Codes 40-103 Door release unit 24Vd.c. with keeper plate 40-104 Door release unit 240Va.c. with keeper plate Product Code 40-105 Floor mounting brackets for 40-103/104 Dimensions: 100H x 85W x 55D mm Cable Entry: 20mm Door Release Units 40-103 40-104 Dimensions: 85H x 85W x 46D mm Armature Dims: Dia 72mm x 21mm deep Voltage: 24Vd.c. 240Va.c.
Addressable 900 Series Detectors Body Optical Ionisation HPO LPCB MR901 MF901 MR901T NSTC MF901 MR901T UL/FM 912P 912I 912HP Marine MR901M MF901M The M900 series are a range of low profile addressable fire detectors. These unobtrusively styled detectors have a number of unique design features to improve their operation, installation and ease of servicing.
Heat These detectors use two networked thermistors in a bridge configuration to provide a fast response, that depends both on absolute temperature and notes the change of temperature. The rate of rise/fixed temperature heat detectors can be used in areas where smoke sensors are unsuitable due to environmental conditions (smoke, dust etc,). Such areas include kitchens, locker rooms, canteens, garages, loading bays etc.
Page 43
Conventional 600 Series Detectors Body LPCB Optical MR601 Ionisation MF601 HPO MR601T R of R Heat MD601 NSTC SSL/NZ* UL/FM MR614 612P MF601 MF614 612I MR601T MR614T 612HP MD614 612H FT MD611 60°C CO MU601 MU614 622H 135°F 632H 200°F VdS MR613 MF613 MR613T MD613 MD623 Marine MR601M MF601M MD601 MD611 *Available from Grinnell Detection Products in Melbourne & Grinnell Supply Sales N.Z.
Heat These detectors use two networked thermistors in a bridge configuration to provide a fast response, that depends both on absolute temperature and notes the change of temperature. The rate of rise/fixed temperature heat detectors can be used in areas where smoke sensors are unsuitable due to environmental conditions (smoke, dust etc,). Such areas include kitchens, locker rooms, canteens, garages, loading bays etc.
Page 46
Tyco M600/M900 Detector Series Identification Card A convenient pocket sized “quick reference card” designed to aid the identification of Tyco M600/M900 Series Detectors. (M900 Series information is on the reverse of card). Product Code AM2801/000 ID Card Note: Cards must be ordered in multiples of 100.
Standard Detector Bases The Standard Universal detector bases are compatible with both conventional (M600) and analogue (M900) addressable detectors. The bases have no electronics and even when the detectors are connected to the bases, they can be electrically disconnected and left in a “park” position. This enables wiring integrity tests to take place without any damage to electronics.
Functional Detector Bases Functional detector bases use a common moulding which incorporates a double side circuit board which enables electrical connections to be made on the top and bottom of the functional base. This allows the functional bases to be retrofitted into new and existing universal bases or alternatively the depth and cost of the installed detector can be reduced by using the functional base instead of the universal base.
Tyco MKII Sounder Base Range Identification Card A convenient pocket sized “quick reference card” designed to aid the identification of the Tyco MKII Sounder Base Range. This concise card provides a simple, effective reference key for rapid identification of sounder base type during the initial visual system analysis and needs assessment. Page 50 Product Code 517.050.016 ID Cards Note: Cards must be ordered in multiples of 100.
MKII Sounder Base Applications Table Page 51
MC900 & 900RBA Functional Relay Base The 900 Series relay base provides dual relay contacts for signalling external devices on addressable systems. Very low operating current even when the relay is energised, enable the relay base to be used without any additional power. On addressable systems, the dual contacts operate when the detector is in alarm OR when commanded to do so by the panel. Features • Dual pole 24V d.c.
M600/900 Detector Ancillaries M600/900 Ancillaries Product Codes 517.051.002 (Supplied in 10’s) M900 Smart card address key 515472 (Supplied in 10’s) 900 Smart card address key (Grinnell) 517.051.402 (Supplied in 10’s) M900M Smart card address key (Marine) Product Code 517.050.002.A Low profile line shorting adaptor commissioning tool (shorts terminals together enabling cable resistance checks to be carried out) - ADT Branded. Product Codes 517.050.003.
Duct Probe Air Sampling MP/SMP Duct Probe Units The MP/SMP Duct Probe Units are designed to be installed in air conditioning supply and exhaust ducts for the purpose of monitoring the airflow for smoke and combustion products. The MP69 and SMP69 probe units are designed to accept and operate with the M600 and M900 series detectors. MP35 and SMP35 duct probe units are available for use with M300 and M500 intrinsically safe series detectors and bases.
Aspirating Smoke Detectors VESDA - Vision Systems VESDA LaserPLUSTM, is a high sensitivity aspirating smoke detector. It provides both an early warning to facilitate intervention, and a suppression (Fire 2) signal to initiate release at an appropriate level, eliminating the need for a separate detection system. The system is modular, displays and programmers can be installed only where needed. Many VESDA products are also available from stock in German.
LaserPLUS Scanners - 7 & 12 Relay Output Variants VESDA LaserPLUS is also available in a Scanner configuration, which allows the system to distinguish and identify the pipe carrying smoke, while sampling multiple sectors. The VESDA LaserPLUS will continue to sample from all sectors to monitor the fire growth and maintain full protection. Features • Individual pipe annunciation • Adaptive scan threshold • Wide sensitivity range (0.
LaserPLUS Standard 19 Inch Sub-Rack Remote Display Assemblies Technical Specification Dimensions: 128H x 482W x 120D mm Product Codes 516.018.201 VSR-2000 19” Sub-rack with 1 detector display and 3 blanks 516.018.203 VSR-2210 19” Sub-rack, 2 detector displays, programmer and 1 blank 516.018.204 VSR-2221 19” Sub-rack with 3 detector displays and programmer 516.018.
LaserPLUS Spares The following common VESDA LaserPLUS spares are kept in stock by Tyco Safety Products. Other spares can be supplied if required. 516.018.504 VSP-005 Filter cartridge (spare) VESDA International Language Decals All VESDA LaserPLUS products are currently supplied from stock in Tyco grey with English labels and software. Labels can be easily changed to any of the languages below.
Special Hazard Detectors S200 Plus Triple IR Solar Blind Flame Detector • Terminals provided for Remote LED connection • BASEEFA (CENELEC) certified • Meets the requirements of EN54 Pt10 • FM, DNV and LRS certified • Very low power consumption (0.
S111 and S121 Series Flame Detectors The S111 and S121 (and variants thereof) are single sensor infra-red flame detectors with optical filtering, suitable for use outdoors in a wide range of applications. Specifically designed for use in the demanding environments of the onshore petro-chemical industry, the S111 and S121 detectors incorporate an abrasion resistant sapphire window in a protective housing to meet IP65.
S100 Series Test Equipment Product Codes 592.001.012 T110 Test Source for use with (517.001.224 ) Solo 704 adaptor tube B and Solo 100/101 poles (517.001.230/226 ) 592.001.005 T110 Adaptor for S131/161 592.001.010 T110 PP9 Battery and Charger kit 592.001.011 T110 Carrying case (not suitable for T210) Datasheet - Product Code PSF60 “T110/T210 Test Source” Manual - Vol01A-01-G1 “Detectors Fire Manual” S100/200 Series Flame Detectors Mounting Bracket Technical Specification Weight: 1.
Intrinsically Safe Point Detectors Features • Conventional and addressable I.S. systems • Suitable for worst case (EEx ia IIC T5) • Tyco High Performance Optical (HPO) smoke detector • Compatible with S231i+ plus flame detector • Compatible range of I.S. callpoints The System Designer must be familiar with BS5345, EN50 and BASEEFA certification and have successfully completed an Appropriate recognised course in Intrinsic Safety.
Optical Smoke Detector The photoelectric scatter type of detector [MR501Ex] will respond quickly to large particle smoke and possibly ignore the small particle smoke. Product Code 516.031.002 (Vol01A-03-D4) MR501Ex Analogue Addressable Optical Smoke Detector Heat Detectors If environmental conditions rule out the use of smoke detectors, then a heat detector of the type MD501Ex/MD601Ex/MD611Ex Range may provide an acceptable, though less sensitive, alternative.
Enhanced Carbon Monoxide Fire & Heat Detector The MDU601EX detector combines the features of both the MU601EX detector and the MD601EX detector to provide a combined CO and Rate of Rise Heat Detector where the sensitivity of the CO detector is enhanced in response to a fast rate of change of temperature. Product Code 516.016.001.Y (Vol 01B-04-D14) MDU 601EX Enhanced Carbon Monoxide Fire & Heat Detector M300/500/MUBEX Detector Bases and Ancillaries Product Codes 517.025.002 M300Ex Mounting base 517.035.
H Series Heat Detectors The and H900 range of fixed temperature heat detectors are designed to operate at 60oC and 90oC respectively. They are particularly suited to areas where rapid changes in temperature and/or high ambient temperature exist, together with unsuitable environmental conditions for smoke detectors. This makes the detectors ideally suited for galleys, laundries etc.
Intrinsically Safe Callpoints A variety of Ex ‘ia’ Intrinsically safe callpoints are available as standard using KAC and MEDC callpoint housings. The CP220Ex is a conventional callpoint for use on BASEEFA Certified System 601. System 601 is compatible with MINERVA 1 to 4, System 1700, NT & MINERVA Addressable DM modules. Dimensions(H x W x D mm) Weight Material Conventional Addressable Colour The IF500Ex is an Intrinsically safe addressable interface module.
Intrinsically Safe Barriers and Housings The following section relates to a range of intrinsically safe barrier and isolator equipment for use with Tyco Safety Products manufactured fire detection systems. It essentially encompasses the relevant MTL 5000 and MTL 7000 series barriers plus the associated housing options as an alternative to existing MTL 700 and MTL 3000 series equipment. On all issues of intrinsically safe systems design, please refer to Manual 26A for guidance.
Safety Enclosures DX Series Enclosures The MTL ‘DX’ Series enclosure equipment is designed to house MTL 5000 isolating interfaces and MTL 7000 series shunt diode safety barriers. Enclosures are usually selected on the number of units they will accommodate. The following table shows the capacity of each of the enclosure types. Enclosure DX070 DX170 MTL5000 Isolators 16mm Pitch 4 (2*) 10 (8*) ProductCodes 517.001.248 DX070 Enclosure MTL 5000/7000 series barriers 517.001.
Beam and Linear Heat Detectors Optical Beam Smoke Detectors • • • • The FIRE-RAY 2000 is an active infra-red smoke detector. The system comprises of three base elements i.e. a transmitter, receiver and Control Unit. Analysis of the modulated infra-red beam by the Control Unit determines whether smoke is present, and if so generates an alarm signal.
LPBD521 - Loop Powered Beam Detector Module The LPBD521 module is used to drive the FireRay 2000 beam detector units directly from the MINERVA loop. A single LPBD521 can be used to power the analyser unit, the beam receiver unit and the transmitter unit. Alternatively, two separate LPBD521's can be used with one to power the analyser unit and receiver units and the second to drive the transmitter separately, either from the same loop or a different loop. Up to 12 LPBD521's can be used per loop.
MXF Optical Fibre Temperature Sensing Technical Specification The MXF100 system complies with: • EMCDirective 89/336/EEC • Low Voltage Directive 72/2/EEC Features • Fibre optic sensor loop up to 2km • Continuous temperature profiles of temperature on a PC • Programmable functions • Programmable number of fire detection zones • Multiple and programmable Alarm levels per fire detection zone The MXF100 contains a Class 3a Laser product and complies with: • BS7192 (1989) • American National Standard Z136.
Detector Test Equipment Point Detector Testing/Commissioning Equipment Manual - Vol01A & Vol01B “Detectors Manual” Product Codes 517.001.230 SOLO100 Telescopic pole 1.26M to 4.5M long 517.001.226 SOLO101 Extension tube 1.13M long for use with 517.001.230 Telescopic extension pole 517.001.264 SOLO 610 Protective Carry/Storage Bag for Solo Detector Test Kit Product Code 517.001.255 SOLO330 Aerosol dispenser for use with all detector ranges. Connects directly to SOLO100/101 poles Product Codes 517.001.
SOLO TEST EQUIPMENT FOR POINT & FLAME DETECTORS S200 Series Test Equipment 592.001.016 T210 Test source for use with (517.001.224 ) SOLO 704 Adaptor Tube B and SOLO100/101 poles (517.001.230/226 ) 592.001.014 T210 Adaptor for S200 Detectors S100 Series Test Equipment 592.001.012 T110 Test Source for use with (517.001.224 ) SOLO 704 Adaptor Tube B and SOLO100/101 poles (517.001.230/226 ) 592.001.010 T110 PP9 Battery and Charger kit 592.001.011 T110 Carrying case (not suitable for T210) 592.001.
CP Series Callpoints A comprehensive range of callpoints for use with both conventional and addressable systems. All the callpoints are designed to enable an alarm signal to be given by breaking a glass element, this operates a switch and is indicated by an LED indicator. If required, an optional transparent hinged cover may be installed to guard against accidental operation.
Conventional CP200 Callpoint The CP200 is a red indoor callpoint with ‘alert’ resistors and LED indicator. The CP200 is LPCB approved. Product Codes 514.001.042.T CP200 without backbox - Thorn Security branded lid 514.001.042.Y CP200 without backbox - Tyco branded lid 514.001.057 CP200E without backbox, European ‘Fire’ marking and glass, unbranded lid 514.001.006 CP200A complete with surface backbox. Arabic text. Thorn Security branded 514.001.042.
CP920 MINERV A Addressable Callpoint The CP920 is a red addressable callpoint with LED indicator. The CP920 is LPCB approved and supplied without backbox. Product Codes 514.001.049.A CP920 ADT branded 514.001.049.T CP920 Thorn Security branded 514.001.049.Y CP920 Tyco Branded CP930 MINERV A Addressable Callpoint The CP930 is a red addressable IP66 weatherproof callpoint with LED indicator. The CP930 is LPCB approved. Product Codes 514.001.050.A CP930 ADT branded 514.001.050.
STOPPER The callpoint STOPPER provides protection from malicious or accidental activation of manual callpoints. Available for flush or surface mounted callpoints the ‘STOPPER’ is also available with optional high pitch sounder which is activated when the lid is lifted. An optional ‘Break-Seal’ fitting kit allows ‘BreakSeals’ to be used to provide extra protection. WARNING:-Break seals only to be fitted by agreement with relevant fire authorities.
STOPPER II STOPPER II is constructed as the STOPPER from tough injection moulded polycarbonate. Physically larger than the STOPPER the STOPPER II extends the number of products to which these tough multi-purpose covers can protect. It consists of a strong tamper-proof clear polycarbonate cover and frame that fits easily over such products as break glass callpoints. The STOPPER II can also be fitted with an integral battery powered sounder which activates if the cover is lifted.
Keybox This tough polycarbonate breakglass keybox is available to protect emergency keys and documents. Product Code 515.001.039 STI6720 Keybox with printed glass Ancillaries - Back Boxes Unless stated the CP200/500/900 indoor callpoints are supplied as flush mount units. The CP range are approved for use with the standard backbox. However, SR2-T and SR3-T backboxes are also available. 515.001.
Fulleon Range of Sounders MXCE 2 Wire Symphoni Sounder A Symphoni electronic sounder designed specifically for installation on the detection zone of the MXCE panel. Ingress Protection: IP42 Termination: 2.5mm2 Screw Terminals Product Codes 576.501.204 Symphoni 2 Wire Sounder (Red) 576.501.
Roshni A flexible alarm sounder for Fire and Security applications complete with volume control and dil switch to provide 32 tones. Low profile Roshni with Deep base offers IP65 protection. All Roshni sounders have synchronised start for self synchronisation without third wire. Technical Specification Dimensions: 93 Dia x 105D mm (Deep base) Colour: Red or white available Approvals: None (Approved variants available) Output Voltage: 9-28Vd.c. Typical Current: 24Vd.c.@16mA Typ.
Flashni automatic sounder synchronisation. Weather resistant to IP65. Technical Specification Dimensions: 93 Dia x 92D mm (Shallow base) 93 Dia x 121D mm (Deep base) Output Voltage: 18-30Vd.c. Typical Current: 24Vd.c.@68mA Typ. Sound Output: @1m 101dB (A) Combined sounder and beacon, combines the features of the Roshni electronic sounder with a fully integrated Xenon beacon.
DB3 Flameproof Horn Sounder Cable Entries: 1 x 20mm EExd. Tone Selection: 27 user selectable tones. This lightweight all GRP flameproof sounder is intended for use in potentially explosive gas and dust atmospheres and has been designed with high ingress protection to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries. The flamepaths, flare and the body, are manufactured completely from a UV stable glass reinforced polyester.
MINERV A Range of Sounders A range of sounders to meet a wide variety of alarm applications where loud, penetrating and distinctive warnings must be given to alert people of fire situations. In addition, multitone electronic sounders can give a variety of sounds to signal other conditions e.g. “extinguishing gas release imminent”, etc.
Electronic Sounders Banshee/Bedlam An ultra low profile alarm sounder for fire and security applications utilising all of the best features of the traditional Banshee plus an additional volume control fitted as standard. The low profile unit has been designed to complement new building interiors and is available in red or white.
Banshee Slow Whoop This sounder has the same features as the standard Banshee sounder but comes with a slow whoop sound as standard to meet the requirements of the Dutch Market. Product Code 576.501.019 24Vd.c. slow whoop low profile red sounder (Dutch) Banshee IS28 Product Code 576.501.013 IS28VCL Banshee IS28 BS5839 low frequency BASEEFA certified intrinsically safe Grey sounder - 98dBA, 10mA. Certificate number. Ex87B2027 EExia IIC T5 Klaxon Secomak Siren Product Code 576.502.
MINERVA Firecryer - Voice Enhanced Sounders Firecryer The MINERVA FIRECRYER is an electronic sounder, which provides as default the same electronic sound as the MINERVA Besson Banshees. In addition, the FIRECRYER provides up to 4 predefined voice messages, which can be synchronised across a zone of sounders. The FIRECRYER offers an excellent service upgrade opportunity in the UK for systems installed to BS5839pt1 and may also provide opportunities elsewhere.
Visual Indicators Single Gang Lamp/Buzzer Units Lamp Buzzer units may be used for local alarms when high level audible warnings may not be appropriate. Available in flush and surface mount versions to fit standard single backboxes Dimensions: 90H x 90W x 40D mm Product Codes 540.001.012 Lamp (red)/buzzer unit flush mounting MK2 including single gang backbox. Labelled ‘Fire’ 540.001.013 Lamp (red)/buzzer unit surface mounting MK2.
XB8 Intrinsically Safe Beacon This ruggedised, intrinsically safe and weatherproof beacon is intended for use in potentially explosive atmospheres, and has been designed with high ingress protection to cope with the harsh environmental conditions found offshore and onshore in the oil, gas and petrochemical industries Product Code 540.001.038 Intrinsically Safe Xenon Beacon (XB8BB024CNR) Technical Specification Certification: CENELEC EN50014, 20 & 39 BASEEFA certificate No.
Auxiliary Interface Relays Boxed Relays 567.001.004 Relay 5000 One or two plug in relays on PCB. Order relay (569.001.007) separately. 567.005.005 Relay 5016. Supplied with 1 PCB but can fit a maximum of 2 PCB’s each containing up to 8 DIL relays. (Rated at 1 amp @ 30Vdc resistive) 567.005.004 Relay 5010. Supplied with 1 PCB but can fit a maximum of 2 PCB’s each containing up to 5 plug in relays. Order relay (569.001.007 ) separately. 568.001.
Fire Resistant Cable DÄTWYLER Lifeline cable is suitable for fire alarms and emergency lighting where BS6387 and BS7629 standards are acceptable and meets the installation and performance requirements of: • BS5839 Pt.1 for use in fire alarms • BS5266 for use with emergency lighting • BS4066 ‘Tests on electrical cable under fire conditions’ • IEC331 fire resistance Lifeline is LPCB approved to BS6387 CAT CWZ and BASEC approved to BS7629.
Water Leak Detection Alarms Introduction The Water Leak detection system is a water detection alarm designed to be used in situations where not just flooding but also undue dampness could cause damage or ultimately become dangerous. The system comprises an electronic monitoring and alarm control panel connected to sensors located in the area requiring protection and can be custom made with a variety of types of detection sensor to suit the characteristics of the areas to be covered.
Wire Free Product Range Introduction Wire free fire system technology is fast becoming a recognised and accepted alternative to wired fire alarm systems. Tyco Safety Products Radio Fire Alarm System provides a level of performance and reliability comparable to hard-wired systems. It also has the added advantage of being totally flexible, quick and easy to install with virtually no damage or disruption.
Field Devices Radio transmitters are incorporated into each field device to communicate with the controllers. The units are programmed with a device number, zone number, system code, RX number and TX number. These identities are sent back to the controller in the event of a fire, battery low condition or tamper, to precisely identify the location of the event on the controller display. Power to the radio transmitter is supplied by a two stage Lithium battery pack .
Callpoints insertion of a test key. When the glass is broken, the micro-switch is released, triggering an alarm transmission, by radio, to the alarm panel. Each unit has a unique address configured during manufacture and is individually addressable by the system controller during commissioning. The unit is programmed to report at regular intervals of 5-9 minutes.
Radio Sounders sounder has 2-way radio communication with the fire system controller using UHF wavebands to receive command instructions and VHF for auto reporting. The radio sounder module 5320 has a set of monitored contacts for the wiring of a remote callpoint, thereby providing a very cost effective component. Designed and manufactured using the latest techniques and surface mount technology ensures component count is kept to a minimum, thereby maximising reliability.
Voice Sounder and Strobe Product Codes Red Voice Sounder& Strobe 517.131.053 Voice sounder/strobe c/w VHF transmitter, UHF receiver, processor, radio address module, battery board, 4 on-board messages activated from any EMS controller. 517.131.056 Weatherproof voice sounder c/w VHF transmitter, UHF receiver, processor , radio address module, battery board, 4 on-board messages activated from any EMS controller. 517.131.057 Master Voice Unit c/w connections for up to 1 monitored slave voice sounder unit.
APPROVALS LISTING OF COMPANY EQUIPMENT Thorn Security Limited is registered by British Standards Institution to BS5750 : Part 1 Note: That while every effort is made to keep this document updated, some approvals will be renewed and new approvals will be acquired between updates. Any queries, reference approvals, should be made to the Approvals Engineer [TYCO SAFETY PRODUCTS} Sunbury-on-Thames. The approvals obtained for company equipment are listed in Table 1.
APPROVALS LISTING OF COMPANY EQUIPMENT Type M500Ex Description Intrinsically Safe Detector Base MD501Ex Intrinsically Safe Analogue Addressable Heat Sensor MF501Ex Analogue Addressable Ion Chamber Sensor [I.S.] MR501Ex Analogue Addressable Optical Sensor [I.S.] MR501TEx Analogue Addressable High Performance Optical Sensor [I.S.] Analogue Addressable Infra Red Sensor [I.S.
Standard AutoCAD Symbols Tyco Safety Products now has an IntraNet site devoted to users of AutoCAD Design Packages for electronic and electrical systems. The site has been set up with a view to utilising a common approach to AutoCAD output for drawing offices using Tyco Safety Products products and systems.
Symbol Name FPAC4.dwg Symbol Name FPAC5.dwg Symbol Name FPANEL.dwg Symbol Name FPM.dwg CONVENTIONAL CEILING MOUNTED SPEAKER CONVENTIONAL HORN CONVENTIONAL PANEL CONVENTIONAL PLANT MODULE Symbol Name FPODPTGX.dwg ADDRESSABLE PHOTO OPTICAL DUCT PROBE Symbol Name FPOTGX.dwg ADDRESSABLE OPTICAL SMOKE DETECTOR Symbol Name FPOV.dwg CONVENTIONAL PHOTO OPTICAL DETECTOR FLOOR/CEILING VOID Symbol Name FPROG.dwg CONVENTIONAL PROGRAMMER Symbol Name FPSU.
INDEX Stockcode 10-115 171.392 20-100 20-101 20-112 20-113 20-118 20-120 2500/021 2500/022 2500/032 2500/034 2500/045 2500/048 2500/049 2500/050 2500/051 2500/052 2500/053 2500/220 2500/221 2500/222 2500/507 2500/755 2500/756 2500/757 2500/758 2500/759 2500/774 2500/775 2500/776 2500/777 2500/778 2501/025 2501/028 3010 3071 3072 3085 3150 Page 102 Product Description SR2-T KAC Backbox With Two Terminals Multiple tone sounder with adj.
INDEX Stockcode 509.022.004 509.022.005 509.022.006 509.022.007 509.022.008 509.022.010 509.022.011 509.022.013 509.022.015 509.022.016 509.022.024 509.022.033 509.022.035 509.030.005 509.030.015 509.030.016 509.030.017 514.001.006 514.001.009 514.001.010.A 514.001.010.T 514.001.010.Y 514.001.012 514.001.013 514.001.014 514.001.017 514.001.022 514.001.023 514.001.042.
INDEX Stockcode 515.001.035 515.001.036 515.001.037 515.001.038 515.001.039 515.001.041 515453 515455 515456 515457 515458 515461 515462 515463 515464 515467 515468 515472 515474 515475 515484 515485 515487 515590 515591 516.009.006 516.009.007 516.009.008 516.009.014 516.009.019 516.009.
INDEX Stockcode 516.033.014 516.037.003 516.037.004 516.037.015 516.038.003 516.038.004 516.039.003 516.039.004 516.039.015 516.040.002 516.040.012 516.050.001.A 516.050.001.T 516.050.004.Y 516.050.031 516.050.041.W 516.050.401 516.051.001.A 516.051.001.T 516.051.001.Y 516.051.031 516.051.401 516.052.001.A 516.052.001.T 516.052.001.Y 516.052.011.A 516.052.011.T 516.052.011.Y 516.052.013.W 516.052.022 516.052.031 516.052.033.
INDEX Stockcode 517.001.204 517.001.205 517.001.206 517.001.207 517.001.224 517.001.226 517.001.230 517.001.231 517.001.233 517.001.234 517.001.240 517.001.242 517.001.243 517.001.244 517.001.245 517.001.246 517.001.247 517.001.248 517.001.254 517.001.255 517.001.256 517.001.264 517.017.005 517.017.006 517.025.002 517.025.010 517.025.021 517.025.022 517.025.026 517.025.027 517.025.028 517.025.029 517.025.030 517.025.031 517.025.033 517.025.035 517.025.036 517.035.002 517.035.006 517.035.007 517.
INDEX Stockcode 517.131.020 517.131.021 517.131.022 517.131.023 517.131.024 517.131.025 517.131.026 517.131.027 517.131.028 517.131.029 517.131.030 517.131.031 517.131.032 517.131.033 517.131.034 517.131.035 517.131.036 517.131.037 517.131.038 517.131.039 517.131.040 517.131.041 517.131.042 517.131.043 517.131.
INDEX Stockcode 547.004.001 555.180.002 555.180.003 555.180.021 555.180.026 557.001.040.A 557.001.040.T 557.001.040.Y 557.180.001 557.180.002 557.180.005 557.180.010 557.180.012 557.180.014 557.180.016 557.180.021 557.180.022 557.180.032 557.180.033 557.180.034 557.180.035.A 557.180.035.T 557.180.051 557.180.052 557.180.054 557.180.055 557.180.062 557.180.063 557.180.065 557.180.076.A 557.180.076.T 557.180.079 557.180.092 557.180.095 557.180.096.
INDEX Stockcode 557.180.722 557.180.831 557.180.832 557.180.833 558.004.006 558.004.007 558.004.013 558.004.014 558.004.015 558.004.016 560.001.012 560.001.013 560.001.015 560.001.016 567.001.004 567.005.004 567.005.005 567.007.008 567.007.009 568.001.006 568.001.007 568.001.008 568.001.011 568.001.013 568.001.014 568.001.016 568.001.017 568.001.018 569.001.007 571.07 571.071 576.500.004.A 576.500.004.T 576.500.009.A 576.500.009.T 576.501.001 576.501.003 576.501.004.A 576.501.004.
INDEX Stockcode 577.001.038 577.001.101 577.001.102 577.001.106 577.001.107 577.002.001 577.002.002 577.002.003 577.002.007 577.002.008 584.002.001 592.001.005 592.001.010 592.001.011 592.001.012 592.001.014 592.001.016 599.001.011 599.001.012 599.001.020 599.047.001 599.047.002 599.047.003 599.047.004 599.047.005 599.047.006 599.047.007 599.047.008 599.047.009 599.047.010 599.047.011 599.047.012 599.047.013 599.047.014 599.047.015 599.048.001 599.048.002 599.048.003 599.048.005 599.048.007 599.
Notes
Notes
Notes
Notes
Fire Product Catalogue JAN 2003 Issue 3 Who’s Where? Product Management Sunbury +44 (0) 1932 743327 Customer Services (UK) Walthamstow +44 (0) 208 919 4000 Distribution Centre (UK) Letchworth +44 (0) 1462 667 700 Walthamstow 160 Billet Road Walthamstow London E17 5DR Telephone: +44 (0) 208 919 4000 Facsimile: +44 (0) 208 919 4040 Letchworth Dunhams Lane Letchworth Herts.
