Service manual

3 • Theory Of Operation

3-40 DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)

Figure 3-41B Feeder/WOW Board (DM475)

3.6 Electronics

PCBs (cont’d)

Feeder/WOW Logic Board (DM475). The feeder/WOW logic board is lo-

cated in the feeder/WOW module of the DM475 and adds WOW machine

motion control (MMC) capability to the existing feeder logic board functional-

ity. The new board is attached to the back of the WOW unit. The feeder/WOW

logic board connects directly to the 6C00 main logic board via three cables.

Feeder/WOW Junction PCB (DM475). The feeder/WOW junction board

is located in the feeder/WOW module of the DM475 and is the connection

point for the WOW width sensors, WOW transport motor and servo, WOW

deck sensors and the thickness encoder. It connects directly to the feeder/

WOW logic board.

Figure 3-41C Feeder/WOW Junction PCB (DM475)

J17 (Not Used)

J19 to WOW Motor

J21 2nd Width Sensor

J22 1st Width SensorJ20 3rd Width Sensor

J10 to Feeder/

WOW board

J12 to WOW Feed Encoder

J13 to Sensors

J16 to WOW Thickness Encoder

J307 Black Con-

nector to Printer

J301 White Con-

nector to Printer

J315 to Feeder Sen-

sors and Encoder

J320 Flex Cable to

Junction Board

J309 to Feed-

er Motor

J302 to Load Cell

J303 USB

to Printer

Not Used