Service manual

6 • Service Menus
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
6-7
6.3 SBR Setup
[DM475]
5. The WOW Calibration screen appears. Ensure the WOW locking screws
are loosened, then press Enter to continue.
Make sure that WOW
locking screws (3) are
backed out and Transport
tray is empty
WOW Calibration
[Enter] to continue
B. When instructed, place a 16 oz. weight onto the center of the WOW
unit (etched circle on top of the feeder/WOW clearance level as-
sembly). Press Enter to continue.
C. When WOW Calibration Complete screen displays, remove weight from
WOW Unit and close feeder/WOW cover. Press Enter to continue.
WOW calibration is
successful.
Remove weight from tray.
WOW Calibration
Complete
[Enter] to continue
16 oz. Weight