Service manual

6 • Service Menus
6-4 DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
6.2 Making SBR
Setup Display
in Service Menu
[DM475]
SBR Setup is only displayed if it has not been completed. If SBR Setup
does not display on the Service Menu and you need to rerun this option, fol-
low the procedure below.
◄ Diagnostics
◄ WOW Options
◄ Platform Options
◄ Time Functions
Service Menu
◄ PM Diagnostics
◄ PM Maintenance
◄ Feeder/WOW Diagnostics
◄ SBR Diagnostics
Diagnostics
2. At the next screen, select SBR Diagnostics.
3. At the next screen, select Reset SBR Status.
◄ Length Calibration
◄ Re-zero Thickness
◄ Last 256 Dimensions
◄ Reset SBR Status
SBR Diagnostics
[Back] When Done
4. At the next screen, select Reset Status.
Remove all SBR setting.
Need Setup again for SBR.
◄ Reset Status
◄ Don't reset status
Reset SBR Status
5. The previous screen displays. Press
Back/C key.
◄ Length Calibration
◄ Re-zero Thickness
◄ Last 256 Dimensions
◄ Reset SBR Status
SBR Diagnostics
[Back] When Done
6. The previous screen displays.
Press Back/C key.
◄ PM Diagnostics
◄ PM Maintenance
◄ Feeder/WOW Diagnostics
◄ SBR Diagnostics
Diagnostics
7. The main Service Menu screen with SBR
Setup displays.
◄ SBR Setup
◄ Diagnostics
◄ WOW Options
◄ Platform Options
Service Menu
1. At the main Service Menu, select Diagnostics.