Service manual

5 • Removal & Replacement
5-68 DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
WOW Section of Feeder/WOW Module (use for DM475)
6. Check to make sure the WOW unit can be moved forward and back-
ward. Move WOW unit all the way back towards the back of the ma-
chine (see bottom right photo).
5.56 Feeder/
WOW
Registration
Wall Alignment
Moving WOW Unit Backward/Forward
Screw Indicating WOW
Unit In Fully Back Position
7. Remove cover screw mounting “L” bracket on right side of bottom chassis.
8. Place “L” bracket between registration wall and WOW deck on side of
machine.
Cover Screw
Mounting “L”
Bracket
“L” Bracket
Registration Wall
WOW Deck
9. Slide WOW unit forward until “L” bracket is tight.