Service manual

5 • Removal & Replacement
5-50 DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
WOW Section of Feeder/WOW Module (use for DM475)
5.47 WOW
Upper
Transport
(as a whole
unit)
1. Remove the feeder/WOW module cover (section 5.39).
2. Open WOW jam release lever.
3. Remove thickness encoder (section 5.42).
4. Remove the eight screws that hold the upper transport to metal frame.
6. Reassemble in reverse order. Keep in mind the following:
• open WOW jam lever to release tension
• ensure two tabs fit into slots
• reinstall thickness encoder
Upper
Transport
Removed
Eight Screws (Circled), Two Tabs (in dotted boxes)
5. Remove upper transport unit (note two tabs) from metal frame.
Thickness Encoder
(Unmounted from wall)
Two Tabs (in
dotted boxes)