Service manual

5 • Removal & Replacement
5-38 DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
Auto-Feeder (use for DM400c/DM450c/DM475)
C
A
B
E
D
F
G
Figure 5-114 Feed Belt Assembly Removal
9. Remove spring (A).
10. Remove the E-Clip (B), and
detach gear unit (C).
11. Remove screw (D) and de-
tach gear (E) and bushing
(F).
12. Remove screw (G) and feed
belt assembly (H).
13. Reassemble in reverse or-
der.
Figure 5-115 Feed Belt Assembly Re-
moved from Roller Plate
B
A
C
C
Figure 5-116 Disconnecting Harness
5.33 Feed Motor
1. Remove the feeder unit (sec-
tion 5.28).
2. Disconnect connector (A),
from feeder PCB and dis-
mount the harness (B) from
the three harness guides (C).
3. Reassemble in reverse order
5.32 Feed Belt
Assembly
H