Service manual

5 • Removal & Replacement
5-26 DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
Auto-Feeder (use for DM400c/DM450c/DM475)
1. Open feed access door and
remove water bottle.
2. Remove two mounting
screws as shown and close
feed access door.
3. Remove four mounting
screws and detach feeder up-
per cover.
4. Reassemble in reverse order.
[DM475 - The left side screw
is the ground for nudger deck
back plate.]
5.25 Feeder
Upper Cover
Feed Access Door
Figure 5-80 Feed Access Door and Water
Bottle
Figure 5-81 Mounting Screws
Water Bottle
Feeder Upper Cover
Figure 5-82 Mounting Screws