Service manual

5 • Removal & Replacement
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
5-15
Printer/Base (use for all models)
5.13 Printhead
Carriage
Assembly
Figure 5-42 Removing Inner Rail Mount-
ing Screw
Figure 5-43 Pushing Rail Forward
Figure 5-44 Removing Inner Rail
Mounting Screw
Figure 5-45 Removing Carriage Assem-
bly
Figure 5-46 Chassis with Carriage As-
sembly Removed
Figure 5-47 Carriage Assembly
Inner Rail Bushing
Snaps in Position
Drive Shaft
Drive Motor
Power Supply Shield
Logic Board
Purge Unit
14. Remove the mounting screw from
the outer rail as shown in Figure
5-44, right.
15. Lift the shaft up slightly and pull it
toward the front of the machine to
remove the carriage assembly.
16. Reassemble in reverse order.