Service manual

4 • Troubleshooting/Diagnostics
DM300c/DM400c/DM475 Service Manual (SV61801 Rev. D)
4-33
Table 4-15 Image Generator Errors (22xx) (cont’d)
4.3 Error Codes
Error Description
221C The text ad works out to be wider than the ad region
221D The text ad works out to be taller than the ad region
221E The ad area doesn’t have any space except for the required border around the text ad
221F One of the text ad lines has a font ID that isn’t allowed to be used for text ads
2220 Something failed previously in the image generator. It won’t work properly until IG_Powerup is called again
2221 Trying to print just an ad and/or an inscription, BUT no ad and no inscription have been selected –OR- there is
no ad area and no inscription area in the indicia region map –OR- combination of the two previous conditions
(e.g., only an ad selected, but no ad area in the region map)
2222 Someone requested a change in the printed batch count duck state when there is no printed batch count field
2223 Someone requested a change in the text entry duck state when there is no text entry region
2224 Someone called IG_LoadDateTime when there is no date/time region map
2225 Someone requested a change in the time duck state when there is no time field
2226 While loading all the desired graphics into the print area, it was found that the total number of columns required
was greater than the maximum number of columns allowed
2227
to
223F
Codes reserved for future image generator errors
Error Description
2240 Can’t match the number of ECC words to a polynomial array. This means there is a mismatch between the bar-
code information table and the list of polynomial arrays in the DmBcPrivate.c file
2241 An ECC mode other than “Data Matrix” was specified in the barcode definition in flash even though only data
matrix barcodes are supported
2242 Based on the number of symbol rows & columns specified in the barcode definition in flash, can’t find its corre-
sponding data in the barcode information table in the DmBcPrivate.c file
2243 Number of barcode symbols is > the number currently supported by the software
2244 Barcode memory space needs to be increased in the DmBcPrivate.c file
2245 Barcode definition in flash indicates more data bytes in the debit certificate than will fit in the barcode data code
words
2246 Somehow the barcode characteristics were never transferred from the barcode definition in flash to the local
global structure in the barcode generator
2247 Had to do too many switches between ASCII encoding and binary encoding
2250 Somehow the length of the data for the 1D barcode is zero after all the spaces are removed from the data
2251 The width of the generated 1D barcode is greater than the allocated width (if a horizontal barcode) or the allo-
cated height (if a vertical barcode)
2252 The amount of data for the 1D barcode is more bytes than will fit in the work buffer
2253 The 1D barcode data contains characters that aren’t supported by the Code 39 character set.
Table 4-16 Barcode Generator Errors (22xx)
This class of errors is reported by the UIC when there are errors within the barcode generator.