Specifications

6-19
6 • Adding Postage/Connecting to Data Center
SV62276 Rev. C
Change Modem Parameters
i
NOTE: Use this if you need to change the modem settings used
to dial into the Pitney Bowes Data Center, but do so only if you
are directed to by a Pitney Bowes representative
1. Press Options.
2. Press Page Down twice.
3. Select "Connect-Data Center".
4. Select "Phone Parameters".
5. Press Page Down
6. Select "Modem Parameters".
7. A warning displays telling you that you should only change this
number if instructed to by Pitney Bowes. Press Yes/Enter to
continue or No to return to the Data Center menu.
8. Key in the new modem parameters (they will contain both alpha
and numeric characters) as given by your Pitney Bowes agent.
9. Select "Set New Value". The display will show "Modem Init String
has been updated".
10 Select "Continue". You return to the Phone Parameters menu.
11. Press Clear (back arrow key) twice to return to Options menu.
Phone Parameters (cont'd)
Settings for Connecting to the Data Center