Specifications

6-13
6 • Adding Postage/Connecting to Data Centre
SV62667 Rev. A
Printing a Funds (Postage) Report
(only accessible at the mailing machine)
A funds report allows you to print a record of how much postage has
been used and how much is remaining in the machine.
1. Press Funds.
2. Press Page Down to the third screen.
3. Select Print Funds Report.
4. At the insert envelope or tape sheet prompt, insert an envelope
or tape sheet into the machine. The machine prints the funds
report (see sample below).
5. Press Clear (back arrow key) or Home to return to Home
screen.
◄Check PBP balance
◄Print Funds Report
Used – the total of all postage ever used in the meter
Available – the amount of postage left in the meter
Total Pieces – the total number of mail pieces run through the
meter that had postage applied
Control Sum – the total of all postage refills for the meter and equals
the amount Used plus Available. This is a postal requirement that
verifies an accurate accounting of the postage in your machine.
Batch Count – the number of mail pieces that had postage ap-
plied since the last time the batch count was cleared
Batch Value – the amount of postage applied since the last time
the batch value was cleared
PSD Serial No. – serial number of this meter (normally meter number)
Used: $495 . 86
Available: $304 . 14
Total Pieces: 40
Control Sum: $800 . 00
Batch Count: 34
Batch Value: $493 . 16
PSD Serial No.: 0011969
06 08 28
5 : 31P
Funds
Report