Specifications

7-9

7 • System Options

SV62667 Rev. A

Setting ENERGY STAR

Sleep Mode Activation Time

You can set the amount of time the machine waits until entering

sleep mode. When the machine is in sleep mode, the display is blank

and you can't process mail. You awaken the machine by merely

pressing any button on the control panel.

1. Press Options.

2. Press Page Down.

3. Select Time and Timeouts.

4. Select Sleep Mode.

5. Key in the amount of minutes (from 1-240) be fore the system

goes into sleep mode.

6. Select OK. The display returns to Time and Timeouts menu.

7. Press Clear (back arrow key) to return to Options menu.

Basic Options

Setting the Date, Time, and Timeouts (cont'd)

SEAL ONLY

NO PRINTING

Insert envelope or

◄Exit SEAL ONLY

Standby Mode–In order to reach the lowest use of power while still

plugged into an outlet, the switch on the back of the machine may be

toggled "off". Before resuming power to the machine, the switch will

need to be switched to the "on" position.

NOTE: When you awaken the machine from sleep mode, it will

always return to the "Seal Only" screen.