Specifications

7-21
7 • System Options
SV62276 Rev. D
Setting Scale Options (cont'd)
Setting Class Change Options
You can set how the scale reacts regarding the ZIP code when the
class changes.
1. At the Home screen, press the selection key next to SCALE: line.
2. Press Page Down twice.
3. Select "Change/Retain ZIP".
4. Select either change ZIP or retain ZIP when class changes. The
current condition is listed at the bottom of the screen.
WHEN CLASS CHANGES
Change/Retain ZIP
WHEN CLASS CHANGES
Change ZIP
Retain ZIP
(Currently Change)
5. Press Clear (back arrow key) to return to the Home screen.
Basic Options
Enabling Scale Stabilizing
In a typical office environment, you may encounter ventilation sys-
tems occasionally blowing on the scale, accidental bumps to the
scale and/or platform, and people dropping mail onto the platform.
This could result in unstable weight readings and frequent scale re-
zero operations. You can minimize these disturbances by enabling
the scale stabilizing feature. Enabling this feature could cause a
slight delay in scale response.
1. Press Options.
2. Press Page Down.
3. Select "Turn items ON/OFF.
4. Press Page Down.
5. Select "Scale Stabilizer".
6. The current setting (YES or NO) is listed on the screen. Follow
the prompt to change the setting.
7. Press Clear (back arrow key) to return to the Home screen.