RTM-100 Series User Manual Remote Theatre Manager USL, Inc. 181 Bonetti Drive San Luis Obispo, CA 93401-7397 USA Phone: +1 805 549 0161 Fax: +1 805 549 0163 www.uslinc.
One-Year Limited Warranty USL, Inc. warrants that the product will be free from defects in material and workmanship under normal usage for a period of one (1) year after its purchase new from an authorized dealer. Our obligation under this warranty is limited to repairing or replacing any product or component which we are satisfied does not conform with the foregoing warranty and which is returned to our factory, freight paid.
Table of Contents One-Year Limited Warranty ....................................................................................................................................2 Table of Contents ...................................................................................................................................................3 Safety Notices ........................................................................................................................................................
Safety Notices 1 . Review the following safety precautions to avoid injury and prevent damage to this product. To avoid potential risk, use this product only as specified and only for the purpose described in the instruction manual. To Avoid Fire and Personal Injury: Observe power source ratings. To avoid risk of fire or electric shock, the power source must be 100 – 240 VAC, 50 – 60 Hz. Do not operate with suspected failures.
RTH-100 Handheld Remote Controller This device complies with part 15 of the FCC rule. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important: Unauthorized change or modification to this product could void the EMC compliance and negate your authority to operate the product.
Disposal and Recycling Wheelie-Bin Symbol This symbol is attached to this product in compliance with the EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Its purpose is to deter the improper disposal of this product and to promote reuse and recycling. Proper Disposal In conformance with the Directive, at end of life, this product should be either sent to an appropriate recycling facility for disassembly and recycling or returned to the supplier.
6. Enter the default pass code “0000”. ( if applicable ) 7. It is important to confirm a wireless connection before using the screen selection buttons. Verify a wireless connection by viewing the wireless icon that is located on the upper left corner of the handheld unit. 8. Touch one of the “Screen” icons of the touchscreen to activate a view one of the multiplex configuration. 9. You are now viewing the SCREEN MANAGER.
The Manager Screen Screen and Display Name User Defined Audio Adjusts Audio Levels Automation Adjusts Lighting Levels Playback Playback Controls Show Automation User-defined Automation Commands Devices Manager List Screen Touch to view the Main Manager Screen Devices Touch to view the Devices Manager List Devices Touch to the Setup for a Device Macros Touch to activate Macros Screen Page 8 Caption Touch to view Closed Captions
Device List Screen Audio USL, Inc. – JSD-100 QSC / Dolby Media Server GDC Digital Doremi / Dolby Projector Barco Series II / Christie/ NEC / Automation Christie ACT/Integ-jnior Audio The USL, Inc. JSD-100 Cinema Audio Processor touchscreen shown contains user controls. These options are the same as those on the front panel of the JSD-100. This touchscreen allows the user access to the front panel controls via the RTH-100 Handheld Remote Controller.
Projector The PROJECTOR touchscreen contains common projectionist controls to remotely adjust the projector’s lamp, dowser, lens movement, focus, and zoom settings. Media From the MEDIA touchscreen you can control the media server. This allows the content playing to be paused / un-paused as well as being able to skip forward and backwards in increments of five seconds. The BACK and FORWARD buttons allow the user to skip back to the beginning or to the next playlist item.
Macros Automation devices are configured with predefined command scripts that are used to control various types of operations in an auditorium. A script is executed by sending a defined command cue (a macro) which is stored in the RTP-100 Wireless Server Module and activated by touching a button from the MACROS or other touchscreens. Note: The buttons on the MANAGER touchscreen are activated by touching a macros button that may be customized via the SETUP button.
Configuring Cinema Devices Screen Setup The SETUP button is used to open the configuration setup screen for the selected items available for screens, devices, macros, and captions. When the SCREEN MANAGER is selected and the SETUP is activated, the configuration settings screen is displayed. For each screen number / auditorium, a configuration may be set. There is ability to enter a name for a given auditorium via the configuration screen.
Device Setup Once a device is selected for configuration, touch the SETUP button located in the lower right corner of the touchscreen. Make needed changes by selecting the device type, the IP Address, or the port and then touch the SUBMIT button located towards the lower midsection of the touchscreen. Note that some devices require a user name and pass-code to access their device (equipment). Each device has a SETUP touchscreen view.
Note: The Automation and Macros Modules have an associated “Command Setup” touchscreen that is accessible by first touching the “Devices” and then touching the device to configure item. As shown below the Automation device was selected and the “Setup” touch button is used to access the automation commands. Each command is configured with button text and device command. A colon is used to delineate the input fields for user interface and command processing.
Product Support USL proudly stands behind its products. We are ready to answer any questions and address of your comments. RTM-100 application notes, manuals and other documents are available on our website at www.uslinc.com or you may contact us by: Phone: +1 805 549 0161 E-mail: support@uslinc.com You may file a support ticket at: www.uslinc.com/support Additional RTM-100 Series User Manuals may be viewed / downloaded at: www.uslinc.
