User`s manual

INTEG Process Group, Inc.
JNIOR A Network I/O Resource 58
Cinema.JNIOR Application Manual
10. Dolby 3D DFC100 Ethernet
Communication Method Ethernet
IP Address Customer Defined
Communications Port 61412
Termination String Optional (default is none required)
Commands Available Enable
(For use in a JNIOR Macro) Disable
Send
NOTE: The Send
command works the same as described under Barco.
11. Dolby 3D DFC100 Serial
Communication Method Serial
JNIOR Serial Port Auxiliary Serial Port (default)
Communications Port 61412
Termination String Optional (default is none required)
Commands Available Enable
(For use in a JNIOR Macro) Disable
Send
NOTE: The Send command works the same as described under Barco.
12. QSC DCP300 Ethernet
Communication Method Ethernet
IP Address Customer Defined
Communications Port 4446
Termination String Optional (default is none required)
Commands Available Active Audio Preset
(For use in a JNIOR Macro) Active Control Preset
Master Gain
Master Mute
Master Amp Power
Send