User`s manual

INTEG Process Group, Inc.

JNIOR

A Network I/O Resource 54

Cinema.JNIOR Application Manual

1. Barco Digital Projector

Communication Method Ethernet

IP Address Customer Defined

Communications Port 43680 (Barco factory default)

Termination String Optional (default is none required)

Commands Available Lamp On

(For use in a JNIOR Macro) Lamp Off

Open Dowser

Close Dowser

Send Macro

Send

NOTES:

A) The Send Macro command is used to send the actual name of any macro

stored on the Barco projector. When this command is used, the Barco will

execute the named macro.

B) The Send command is used to send an ASCII string or a hexadecimal

string. An ASCII string can contain any character and spaces. The text is

sent as lower case unless the Case Sensitivity key is changed to true

(see section 6.1). A hexadecimal string must start with the letters HEX

and then each hexadecimal character must consist of 2 hex characters

followed by an H. An example is: HEX 4AH 4EH 49H 4FH 52H

(which is JNIOR in ASCII).

2. Christie Digital Projector