User`s manual

INTEG Process Group, Inc.
JNIOR A Network I/O Resource 36
Cinema.JNIOR Application Manual
7.7 Feature Operations
After the preshow is complete as determined by the JNIOR receiving the end of preshow
command from the Client, the JNIOR will soft toggle the “Feature Start Input” (if
configured) so that the digital Cinema Server receives the signal to start the movie. The
digital cinema server will execute its own internally stored macro that will include
turning on the Preshow Lock (the Cinema Server sends a JNIOR protocol command to
turn on the appropriate output).
While the Preshow Lock output is high, the JNIOR will reject (ignore) all commands
(Appendix C) from the Client.
When the feature is over, the digital cinema server will send a command to turn the
Preshow Lock output off (low). The JNIOR will send a message to the Client that the
movie is completed.
Movie End Macro
This is the name of the macro that will be executed automatically by the JNIOR when the
Preshow Lock Output returns to the off (low) state. The Preshow Lock Output is
typically controlled by the Cinema Server.
Registry Key Default Valid Values
AppData/Cinema/MACROS/MovieEndMacro Movie End Any Macro Name