User`s manual

INTEG Process Group, Inc.
JNIOR A Network I/O Resource 19
Cinema.JNIOR Application Manual
6 Devices and Macro File Loading and Testing
After you have created your Devices file and Macro file, you will need to upload them to
your JNIOR and test them.
6.1 Loading Files on the JNIOR
The files must be loaded on the JNIOR using the JNIOR Support Tool so that only one
copy of each file is on the JNIOR and the files are placed in the proper location. The
JNIOR Support Tool will check for existing files and delete them before the new file is
transferred.
NEW for Cinema.JNIOR Version 2.11
When you Publish a Devices file or Macro file from the Devices Tab or Macro Tab,
the JNIOR will check for an existing file and if it is the same name, it will overwrite
it. If the name is different, it will prompt you to confirm that you want the new file.
After the file has been successfully loaded on the JNIOR, Cinema.JNIOR will
recognize the new file and automatically ingest the file if the new file has the same
name as the existing file. You do NOT need to reboot the JNIOR nor restart the
program. Cinema.JNIOR is now ‘hot configurable’ for the Devices file and Macro
file and the Digital Input Triggers and JNIOR Control Panel Switches.
If the new devices file or macro file has a new name, then the JNIOR Support Tool
will prompt you asking if you want the application restarted to use the new file.
Below is a screen picture showing the prompt when the JNIOR Support Tool has
discovered a Macro file exists with a different name. The dialogue is similar for a
Devices file.