User`s manual

INTEG Process Group, Inc.
JNIOR A Network I/O Resource 11
Cinema.JNIOR Application Manual
3.7 Cinema.JNIOR Configuration Overview
Cinema.JNIOR has a variety of items that must be set-up by the user. These items can be
broken down into the following main categories:
1) Devices – this is a list of any device that will be utilized by the macros. This is an
optional feature. The list must be set-up and transferred to the JNIOR using the
JNIOR Support Tool. The user will ‘link’ to this file during the Macro
configuration.
2) Macros – the user creates a list of macros to be run by the cinema application and
can include sending commands to connected devices. The list must be set-up and
transferred to the JNIOR using the JNIOR Support Tool.
3) Configuration Parameters (Registry Keys) – there are a variety of
configuration parameters that can adjust the functionality of the Cinema.JNIOR
application for a variety of situations. Many of the Configuration Parameters can
be used at their default settings. However, the flexibility to change the parameters
allows the user to utilize the application for a variety of situations. The
configuration parameters are stored in the JNIOR Registry system.
The Configuration Parameters can be set and/or edited using the JNIOR Support Tool,
the Registry Editor Tab on the main JNIOR Web page, and/or the Registry Editor
function in a Telnet (or HyperTerminal) session. Only the relevant Registry items are
described in this document. Please consult the appropriate manual for additional details
on the mechanics of using the above:
- JNIOR Support Tool Manual
- Web Based Interface Manual (Registry Editor tab)
- Registry Key Assignments document (Registry Editor via Telnet or
HyperTerminal)