Specifications

Page19
12 AutomationReturn.Returncontrolandstatussignalshere.
13 +5Vat100mAtodriveexternalindicators.
14 Status1.Lowwhenformat1(COAX1)isselected.
15 Status2.Lowwhenformat2(COAX2)isselected.
16 Status3.Lowwhenformat3(TOSLINK)isselected.
17 Status4.Lowwhenformat4(16ChannelDigital)isselected.
18 Status5.Lowwhenformat5(USER1)isselected.
19 Status6.Lowwhenformat6(USER2)isselected.
20 Status7.Lowwhenformat7(8ChannelAnalog)isselected.
21 Status8.Lowwhenformat8(NON/SYNC)isselected.
22 Status9.Lowwhenformat9(AUX)isselected.
23 Status10.Lowwhenformat10(MIC)isselected.
24 MuteStatus.Lowwhenthesystemismuted.
25 Unused.Makenoconnectiontothispin.

RS232Interface
TheRS232interfaceappearsonaDE9Fconnectorontherearpanel.TheconnectoriswiredasaDCEdevice.
AcommandinterpreteracceptsASCIIcommands(describedinAppendixA)overtheRS232andEthernet
interfaces.TheRS232portoperatesat38.4kbps,8N1(8databits,noparity,
1stopbit),hardwarehandshake.
Inmostsituations,nohandshakeisrequired,andtheRTSandCTSpinscanbeleftopen.TheUSLsupplied
ferriteblockshouldbeclippedontothecablesadjacenttotheconnectorstocomplywithFCCandCE
emissionrequirements.




