Specifications

UPPER HEAT SHOE REMOVAL INSTRUCTIONS
1. Unplug laminator and allow it to cool to room temperature.
2. Remove the left side housing. First remove the thermometer & temperature knob
(shown in figure 16-1). The temperature knob has a small Allen head set screw retaining it.
Then remove the housing by unscrewing 4 Allen head screws. Set housing assembly aside.
3. Unplug the upper heat shoe wires (A) from the terminal block (B). [Figure 16-2]
4. Gently lift the heat shoe and pull forward. Be careful not to damage the wires.
Lift from the right side first.
Figure 16-1
Figure 16-2
1
23
4
B
A
Thermometer
Temp. Knob
16
17