Manual

22 Pixels
™
Design and Installation Guide
Frame-Mounted Backlit System
Installation – Perimeter Frame
Step 1
8" min.
floor line
horizontal reference line
vertical reference line
Establish the bottom corner of the
installation to be at least 8 inches
off the floor and use a cross laser
to determine both vertical and
horizontal control lines.
Step 2
Install perimeter frame attachment
clips (WMPFAC) inside of the
trim per shop drawing supplied.
Pre-assemble the corner splice into
the bottom horizontal trim piece.
Note: These installation instructions cover the basic rectangular design using 28 x 28 panels.
There will be more complex designs that require a different or more complex grid layout.
Installation Detail