Owner's manual

On DIAMONDFLEX
™
panels, look for the
notch in the panel corner that indicates
directionality.
A.
E.
1. 1. 1.
Lay CURVATURA 2⬘x2⬘ panels into the grid
one at a time.
Some panels are directional; check for
directional markings and install accordingly.
After each panel has been installed, bend
the Hold-Down Tabs as necessary to
secure the panel, eliminating all gaps
between the panels and grid. Be careful
not to overbend the tabs as this could
damage the panel.
After installing each panel, be sure that
sufficient Hold-Down Tabs have been bent
to prevent the panel from lifting. Adjusting
tabs later will be difficult.
D.
Page 6 of 8
Step 4: Panel Installation
CURVATURA 2⬘ x 2⬘
Ceiling System
Installation
Instructions
B. C.