Manual

When not in use, ALWAYS store firearms and ammunition
separately in a locked, secure environment securely out of
the reach of children. As an added safety measure, install a
gunlock in the trigger guard of your firearm before storing it.
DO NOT store your firearm in an airtight container.
DO NOT seal the barrel to block out dust. This will cause
moisture to accumulate in the barrel and chambers that will
lead to corrosion of the metal surfaces.
ALWAYS store ammunition in a separate, locked container.
Disassembly and Reassembly
To take apart the rifle -- First check that the rifle is not
loaded. Take out the tang screw. Draw off the butt stock.
Take out the magazine screw at the front end and remove the
magazine. Take out the two side screws, cock the piece and
draw the slide about halfway to the rear and withdraw the
trigger plate. Slide the bolt clear back, insert a punch in the
small hole on the left hand side, and push out the locking
brace pin, and slide out the bolt. The other parts can be
removed without special directions.
To reassemble the rifle -- Replace the parts in the reverse
order from that given for taking the rifle apart.
15