Manual

FIGURE 9 - lNSTALLING BARREL
BUSHING AND RECOIL SPRING/S
FIGURE 10 - INSTALLING SLIDE STOP
33
Continue pushing the
slide rearward until
the disassembly
notch lines up with
the rear part of the
slide stop. Now push
the slide stop up and
in against the slide
stop plunger until the
slide stop is fully
home.
5. Rest pistol on table
or bench with muzzle,
pointing upward.
6. Press down on
recoil spring plug
compressing the
recoil spring into the
slide until the plug is
fully home, then
rotate the barrel
bushing. Align the
arched part of the
bushing so that it
straddles the recoil
spring plug and locks
it in place.