Manual

5. Pull slide to rear until lug
on slide stop is opposite dis-
assembly notch (See Figure
7) and push rounded end of
pin of slide stop (on right
side of receiver) inward and
through receiver to disen-
gage slide stop from slide.
6. Lift out slide stop. (See
Figure 7).
7. Push slide forward off the receiver.
8. Lift recoil springs and guide and pull them rearward
out of slide. (See Figure 8)
9. Turn barrel bushing counterclockwise, push barrel and
barrel bushing forward until bushing is clear of slide,
then remove bushing from barrel.
10. Push link forward and remove barrel from slide.
FIGURE 7 - REMOVING SLIDE STOP
RECOIL SPRING
RECOIL SPRING
GUIDE
BARREL LINK FORWARD
SLIDE
FIGURE 8 - BARREL LINK MUST BE FORWARD ONLY FOR BARREL TO
BE REMOVED AND ASSEMBLED THROUGH THE SLIDE
31