User manual

Plugiator User Manual

Plug-in Manager software in the Plugiator box, use the "Store" function of the

preset knob.

3. Quick pads to load presets or plug-ins you have previously assigned to that

quick pad number. This will call up the corresponding preset which is stored in

the Plugiator box (refer to the previous chapter "Plugiator Control Interface")

4. Changing presets from your MIDI keyboard by sending MIDI Program Change

messages in the range of 1 to 100. This will call up the corresponding preset

which is stored in the Plugiator box.

Note: Note:

Note: Presets which are stored in the Plugiator box are not nessesarily in sync with

presets listed in the Plug-In Manager Software. Changes you make in the software

will not be stored in the box unless you write the bank to the Plugiator hardware. Vice

versa, changes you make to the presets stored in the Plugiator box will not be available

in the software unless you read out a bank from the Plugiator box. That was done on

purpose to allow management of multiple banks across multiple Plugiator boxes.

MIDI PMIDI P

MIDI P

rogram Change Listrogram Change List

rogram Change List

MIDI Program change 1....100 Loading Presets.

MIDI Program change 101....108 + any Note Loading Plug-ins.

MIDI Program change 109....127 Have no effect.