Owner's Manual

2-3-2 When the iPod is connected to the interface module, the iPod will take approximately 30
seconds to complete its external control mode configuration. During this period
of time, the
iPod screen's display will continue to change until the configuration is completed.
2-3-3
iPod touch, iPhone and G3 iPod are not compatible to Hybrid Mode. They are compatible to
the Playlist
Mode and Direct Mode.
2-3-4
iPod classic and iPod 3
1d
generation nano are not compatible to Hybrid Mode if its linnware
is 1.1 or newer. They are compatible to the Playlist Mode and Direct Mode.
2-3-5
iPod video with firmware 1.2.3 or newer is not compatible to Hybrid Mode.
They are compatible to the Playlist Mode and Direct Mode.
2-4 Additional AlJX INPUT Option Selection
PA II-CHR interface adaptor is capable of connecting two audio sources to your Chrysler radio
including the iPod.
The additional audio source connects to the RCA input jack labeled as
AUX INPTUT. If you choose to use AUX INPUT, the DIP switch #1 at the side of adaptor box
must be set
to "OFF" position (factory presets it at "ON" position).
The audio source at
AUX INPUT can be accessed at CD 6 Track I after selecting CD changer
source on the radio.
CD I to CD 4 are for accessing Playlists and CD 5 is for accessing all songs
on iPod.
Operation of AlJX
If the "AUX INPUT" option is selected, radio will display "CD 6 Track I" when DISC button is
pressed. "CD 6 Track
I" gives access to the audio source connected to AUX INPUT port.
2-5
DIP Switch Setting Summary
DIP Switch Position Function
#1 ON
RCA Aux Input Disabled
#1
OFF RCAAux Input Enabled
#2
ON Hybrid Mode or Playlist Mode Selected
(depends on iPod finnware version)
#2 OFF Direct Mode Selected