Specifications

FWC Contact Retenon Tanks - Dimensions & Capacies
Model Item # Total Tank Volume Height Diameter
Socket Glue Con
-
necon
FPT Total Weight
Gallons Litres In Cm In Cm Lbs Kilos
FWC 30 33201-1 30 114 42.5 108 16.5 41.8 1 1/4”schd-80 1 1/4” 23.0 10.4
FWC 40 33202-1 40 151 53.4 135.6 16.5 41.8 1 1/4”schd-80 1 1/4” 31.0 14.1
FWC 40 SQ 33203-1 40 151 36.9 93.8 21.4 54.2 1 1/4”schd-80 1 1/4” 33.1 15.0
FWC 80 33204-1 80 303 64.1 162.8 21.4 54.2 1 1/4”schd-80 1 1/4” 60.0 27.0
FWC 120 33205-1 120 454 71.5 181.6 24.2 61.4 1 1/4”schd-80 1 1/4” 83.5 38.0
Maximum working temperature, internal & external 120F. Materials of Construcon: Tank top and boom domes injecon molded copolymer polypropylene. Shell
extruded polypropylene. Outer shell composite construcon with berglass coated with epoxy resin. Base is injecon molded ABS. Top and side ports are stainless
steel reinforced.
BAF Mixing Tank - Dimensions & Capacies
Model Item #
Total Tank Volume Height Diameter
Thread Connec
-
on
Outlet Connecon
at top of tank Total Weight
Gallons Litres In Cm In Cm Lbs Kilos
BAF 80 33217 80 303 64.1 163 21.4 54.4 1 1/4”NPT 1 1/4” FPT 23.0 10.4
BAF 120 33211 119 450 71.5 182 21.4 54.4 1 1/4”NPT 1 1/4” FPT 31.0 14.1
Maximum working pressure 100 PSI. Maximum working temperature, internal & external 120F. Materials of Construcon: Copolymer polypropylene wrapped with
berglass coated with epoxy resin. Base is rigid ABS. Inner bae is a copolymer polypropylene with a PVC sch 40 standpipe and diuser cap. Top port is stainless steel
reinforced and boome connecons are a 1 1/4” NPT schedule 80- connecon
Retention Tanks
Mixing Tanks
Made from a unique 3 piece internal construction that allows for consis-
tent engineered dome proles and integrally bonded connections
that lead to longer tank life. Its heavy duty base is molded out of ABS
for maximum strength and durability. And, It has a removable
schedule 80 PVC bottom connection that can be “accessorized” for
increased installation exibility.
0 Durable PVC water connection.
0 Flexwave tanks are made in the USA and built to comply with
NSF/ANSI Std 61
0 5 year warranty
The Mixmaster(BAF) Series tanks are a retention tank with an internal
bae and diuser which improves mixing and
increases the retention time improving the eectiveness of chemical
treatment of water for disinfection or mineral removal. Great for killing
bacteria or for agricultural applica- tions.
0 Polypropylene tank reinforced with berglass sealed with
epoxy resin.
0 Cross- link polyethylene upper and lower water chamber.
Standpipe and diuser 1-1/4”pvc sch 40
Item # Descripon
50035 Sani-System RO Sanizer 0.25 .oz (24 Packets)
50032 Sani-System Water Soener Sanizer 0.5 .oz (24 Packets)
Chemicals
Sani-System Liquid Sanitizer Concentrate
Sani-System is the only EPA & NSF approved sanitizer for use in water soeners and reverse osmosis units. It’s proven
to kill 99.99% of harmful bacteria without the use of chlorine, oxidizers or acids that can harm system equipment
parts and resin. The exact pre-measured doses of concentrated
Simple to Use:
For water soeners it is as simple as pouring into the brine well or brine tank and manually regenerating the unit.
For reverse osmosis units, simply remove the cartridges and place the packet contents in the rst housing and ush.
Sani-System is the only sanitizer on the market proven by the WQA to safely sanitize an RO unit membrane.
User Benets:
0 Faster, easier and safer than other alternave
sanitizers
0 Easy & reliable single dose packages
0 99.99% eective kill rate against harmful bacteria
0 Only sanitizer on market proven by WQA to sanitize
membrane
Technical Information:
0 Sani-System is a clear liquid and will react to
oxidizers
0 Routine storage. Rubber gloves are suggested
when handling. Read all relevant MSDS before
handling.
0 Do not mix with other chemicals
0 Certied to NSF/ANSI 60 Standards
94 95
Accessories Accessories