Operating instructions

USING MODEM STATION
74
The “Data Control” screen allows you to
assign the following basic communications
settings:
♦ PORT SPEED
♦ PARITY
♦ STOP BITS
♦ WORD
♦ FLOW CONTROL
♦ SERIAL PORT RATE
For information on using these settings, please
refer to the “Glossary” at the back of this
manual.
Click Help for quick definitions of the
terminology used in this screen.
In the upper left-hand corner of the screen,
you will see the data control commands
currently in use.
Once you have entered the Data Control
settings, click Save to Modem. This stores
the settings so that you do not have to re-enter
them.
This screen also displays the default DIP
switch settings.
TECHNICAL STUFF: DIP
switches are tiny switches that
control a few basic functions on
some external modems. On
modems without DIP switches,
these functions are handled by
modem commands.
Click Exit to return to the Modem
Configurator menu.