Operating instructions

TROUBLESHOOTING AND ONLINE HELP RESOURCES
107
Online Help Resources
Connecting to the U.S. Robotics BBS
To connect to the U.S. Robotics Bulletin
Board System, follow these steps:
1. Start RapidComm. The software settings
for the BBS are:
ANSI terminal emulation
Data Bits: 8
Parity: None
Stop Bits: 1
2. Put RapidComm in Terminal mode by
clicking on the Terminal button (see the
following screen image).
3. Type ATDS0 and press ENTER.
NOTE: ATDS0 automatically dials
1-847-982-5092, the U.S. Robotics
BBS.
If this is your first time connecting to our
BBS, you will be asked to enter your name,