Installation guide

different letter, type that letter in place of “D”) and click OK.

I accidentally clicked Cancel during the installation procedure.

Possible Solution:

Remove and reinsert the U.S. Robotics Installation CD-ROM into your CD-ROM drive. Repeat the

installation procedure of the software before you install any hardware.

My computer does not recognise the 802.11g 54Mbps USB Adapter.

Possible Solution:

The 802.11g 54Mbps USB Adapter may not be properly connected. Make sure the 802.11g

54Mbps USB Adapter is fully inserted into the USB port on your computer.

The 802.11g 54Mbps USB Adapter does not work properly, and I may need to unin-

stall the device.

Possible Solution:

Check to be certain the 802.11g 54Mbps USB Adapter is not in use before removing it. The com-

puter may lock up if the 802.11g 54Mbps USB Adapter is removed while in use. If the 802.11g

54Mbps USB Adapter is not functioning correctly, perform the following steps:

Windows XP Users: Click Windows Start, All Programs, 802.11g Wireless USB Adapter

Utility, and then Uninstall.

Windows 98, Me, and 2000 Users: Click Windows Start, Programs, 802.11g Wireless USB

Adapter Utility, and then Uninstall.

I uninstalled the Configuration Utility and my computer doesn’t detect the 802.11g

54Mbps USB Adapter when I attempt to reinstall the Configuration Utility.

Possible Solution:

If you uninstalled the Configuration Utility and then reinstalled it, you will need to unplug and

then plug back in the 802.11g 54Mbps USB Adapter. Your computer will then detect the 802.11g

54Mbps USB Adapter.

When I perform a Site Survey, I cannot locate the wireless network to which I want to

connect.

Possible Solution:

If you do not see the correct wireless network, click Refresh.

If you still do not see the correct wireless network when you perform a Site Survey, try creating a

profile using the necessary connection information for the appropriate wireless network, select-

ing the profile, and then clicking Apply in the Configuration tab. Refer to the “Navigating the Wire-

less Configuration Utility” section of the User Guide on the Installation CD-ROM for more

information about creating a profile.

For more troubleshooting information or for advanced wireless configuration options, refer to the

User Guide on the Installation CD-ROM or go to www.usr.com/support

Downloaded from www.Manualslib.com manuals search engine