User guide

ROUBLESHOOTING

Make sure that your computer is using an IP address that is within

the default range of 192.168.2.xxx. Make sure the address of the sub-

net mask is 255.255.255.0. The Default Gateway should be the IP

address of the Wireless 54Mbps DSL Router, which is 192.168.2.1.

Possible Solution:

You need to verify the connection setting of your Web browser and

that the HTTP Proxy feature of your Web browser is disabled. You

need to do this so that your Web browser can read the configuration

pages inside your Wireless 54Mbps DSL Router. Launch your Web

browser.

Internet Explorer users: Click Tools, Internet Options, and then the

Connections tab. Select Never dial a connection, click Apply, and

then click OK. Click Tools again, then click Internet Options. Click the

Connections tab, and click the LAN Settings button. Clear all the

check boxes and click OK. Click OK to close Internet Options.

Netscape Navigator users: Click Edit, Preferences, and then double-

click Advanced in the Category window. Click Proxies, select Direct

connection to the Internet, and then click OK. Click Edit again, then

click Preferences. Under Category, double-click Advanced, then click

Proxies. Select Direct connection to the Internet and click OK.

I am no longer able to access the Internet through the Wireless

54Mbps DSL Router.

Possible Solution:

Make sure that the power cord, the DSL cable, and the Ethernet cable

are all connected correctly.

Possible Solution:

Make sure that your computer is using an IP address that is within

the default range of 192.168.2.xxx. Make sure the address of the sub-

net mask is 255.255.255.0. The Default Gateway should be the IP

address of the Wireless 54Mbps DSL Router, which is 192.168.2.1. To