User guide

C ONFIGURING THE W IRELESS 54M BPS ADSL R OUTER
28
Note: Remember to configure your client PCs for dynamic
address allocation.
Wireless
The Wireless 54Mbps ADSL Router also operates as a wireless access
point, allowing wireless computers to communicate with each other.
To configure this function, you need to enable the wireless function,
define the radio channel, the domain identifier, and the security
options. Select Enable and click
SAVE SETTINGS .
Channel and SSID
You must specify a common radio channel and SSID (Service Set ID)
to be used by the Wireless 54Mbps ADSL Router and all of its
wireless clients. Be sure you configure all of the clients to the same
values.
IP Address Pool
Start IP Address Specify the start IP address of the DHCP pool. Do not include the
gateway address of the Wireless 54Mbps ADSL Router in the
client address pool. If you change the pool range, make sure the
first three octets match the gateway’s IP address, i.e.,
192.168.2.xxx.
End IP Address Specify the end IP address of the DHCP pool.
Domain Name If your network uses a domain name, enter it here. Otherwise,
leave this field blank.
Parameter Description