User guide

S ETUP W IZARD
17
ISP uses PPPoA - Parameter Setting
Enter the PPPoA (Point-to-Point Protocol over ATM) settings provided
by your ISP.
Click NEXT to continue to the Confirm settings page (see “5. Confirm
your settings” later in this document).
Parameter Description
VPI/VCI Enter the Virtual Path Identifier (VPI) and Virtual
Circuit Identifier (VCI) supplied by your ISP.
Encapsulation Select the encapsulation used by ISP from the
dropdown list.
Username Enter the ISP assigned user name.
Password Enter your password.
Confirm Password Confirm your password.