User guide

Serial ATA 4-Drive NAS
User Guide
Accessing the Storage System through FTP and SSH - 86
has no effect on file transfers between the users and the storage system in any way.
To enable SSH support:
1. Enter this URL in the browser’s address bar, and then press Enter:
http://storage_system/ssh_controlF.cgi
where storage_system is the name or IP address of the storage system.
The SSH page appears. This is a hidden web page that is not accessable from the Web User Inter-
face.
2. Click Turn On.
When SSH becomes active, the SSH page changes to allow the administrator the option of later
disabling SSH.
To return to the Web User Interface, click the browser’s Back button until the Web User Interface
reappears, or enter this URL in the browser’s address bar, and then press Enter:
Note: You can use the storage system name only if that name is registered with a DNS server on
your network.