User guide

Serial ATA 4-Drive NAS
User Guide
Troubleshooting - 141
displays in parentheses the number of users, AD Bind Point total users, and the limit for number of users.
If the numbers within the parentheses indicate zero users and zero AD Bind Point users (0/0/128),
navigate to the Advanced : System Log page and look for synchronization or clock errors.
If synchronization or clock errors are indicated, navigate to the Advanced : System page and compare
the system time settings with the Active Directory server’s time. If they are not within five minutes of each
other, change the time for the storage system (as described in “Changing the System Settings” on
page 69) so that their times match. Return to the Users : Users & Computers page and click
Synchronize Now.
The storage system is not distributing IP addresses.
Make sure that Enable DHCP server is selected on the Network page (as described in “Changing the
Network Settings” on page 72), and that the starting and ending IP addresses are valid. The first three digit
groups of both the starting IP address and ending IP address must be the same.