User guide
Serial ATA 4-Drive NAS
User Guide
Disk Configurations - 130
your disks (as described in “Reconfiguring Your Storage System Disks” on page 75).
Responding to RAID Degradation
When disk removal/failure causes RAID degradation, the Disk Change Notification page appears when
you access the Web User Interface or refresh the browser window:
Take the appropriate action:
Caution: Reconfiguring your disks will delete all the data on your storage system.
To do this Do this
Scan the storage system again and
update the information on the page
Click Scan.
Re-install the same disk or install a
new disk
Click Shut Down.
After the storage system shuts down, install the disk and then restart the
system.
Note: If you are re-installing multiple disks, be sure to re-install them in the
opposite order than you removed them.
Return to the Web User Interface
and continue to operate in a
degraded mode
Click Continue.