User guide
Serial ATA 4-Drive NAS
User Guide
Protecting Local Disks - 103
If you clear this option, the disk will be backed up at the next scheduled time or the next time you per-
form a manual backup.
8. If you ever need to recover your disk using the recovery CD, you’ll be prompted for a password. In
Recovery password, enter the password that you’d like to use, enter it again in Retype your pass-
word, and then click Next.
Notes:
• The recovery password must be 12–16 characters long. It cannot contain multi-byte words. This
means that you can only enter ASCII characters whose code values are less than 128.
• The same password is used for all disks backed up to the same storage system. If you subse-
quently protect a second disk using the same storage system, you will not be prompted to pro-
vide this password again. However, if you protect a second disk using a different storage
system, you will be prompted to provide a password for that storage system.
• You can change this password later using DiskSafe Express (as described in “Changing the
Recovery Password” on page 107).