Specifications

Computer
Products
Section 24
570
Order Online
www.mcminone.com
NET 30
Terms
24
ATX Power
Supplies
•High–efficiency,
low–noise power
supplies for ATX style case
Features: •Output over–voltage and
short–circuit protection •MTBF: Above 100,000
hours •Includes AC power cord and built–in
switch Specifications: •Input voltage:
95~132/180~264VAC, 47~63Hz •Output voltage:
+3.3V, +5V, +12V, -5V, -12V, +5V •Dimensions: 5.9" x
3.4" x 5.5"
Order # Wattage Fan (1-9) (10-up)
83-8360 250 Sleeve $39.95 $37.03
83-10659 250 Sleeve with 59.95 57.95
monitor outlet
83-8361 300 Ball–bearing 37.95 36.00
83-8362 350 Ball–bearing 52.95 51.45
83-8363 400 Ball–bearing 79.95 77.95
24 Pin Prescott Power Supplies
83-10660 300 Ball–bearing 42.95 41.55
Replacement
HP Power
Supplies
These hard to find power supplies include the HP
video connector and the Intel P4 connector. These
allow you to replace your old power supply with the
same specifications as the original at half the cost.
Choose from MATX or ATX power supplies that drop
right into your HP machine. We can check your system
model number to provide you with the exact power
supply. Ball bearing fans are used to ensure a long
MTBF. Specifications: #83-10047: •Connectors: 1 x
ATX 20 pin, 5 x 4 pin molex, 1x HP floppy, 1 x HP
video, 1 x ATX P4 •Dimension: (W) 150mm x (D)
100mm x (H) 86mm #83-10048: •Connectors: 1 x ATX
20 pin, 3 x 4 pin molex, 1 x floppy, 1 x HP video, 1 x
ATX P4 •Dimensions: (W) 125mm x (D) 100mm x (H)
76mm #83-10049: •Connectors: 1 x ATX 20 pin, 1 x
AUX, 3 x 4 pin molex, 1 x floppy, 1 x HP video,
1 x ATX P4 •Dimensions: 140mm (W)
x 150mm (D) x 74mm (H)
Fig.Order # Mfr. # Description (ea.)
A 83-10047 FSP180SPV-HP 180W Micro $39.95
ATX Power Supply
B 83-10048 FSP180NIV-HP 180W Micro ATX Power 35.95
Supply (with bottom fan)
C 83-10049 FSP250ATV-HP 250W ATX Power Supply 49.95
- 23-200 Additional power cords 6.09
A
C
B
#23-200
Sparkle Power
MATX P4
Power Supplies
•High-efficiency,
low-noise power
supplies for
MATX style case
Features: •Output
over-voltage and
short-circuit
protection •MTBF:
Above 100,000
hours •Includes AC power cord and built-in
switch Specifications: •Input voltage:
95~132/190~264VAC, switch-select, 47~63Hz
•Output voltage: +3.3V, +5V, +12V, -5V, -12V,
+5Vsb •Dimensions: 4.9" x 3" x 3.9"
Order # Wattage Fan (1-9) (10-up)
83-9371 180 Ball-bearing $24.95 $23.95
83-9372 180 Sleeve 23.95 22.92
SPARKLEPOWER
AT Power
Supplies
Features:
•Output
over–voltage
and short–circuit protection
•MTBF: Above 100,000 hours •Includes 6' AC power
cord and on/off switch Specifications: •Input
voltage: 95~132/180~264VAC, 47~63Hz •Output
voltage: +5V, +12V, -5V, -12V •Dimensions: 5.9" x
3.4" x 5.5"
Order # Wattage Fan (1-9) (10-up)
83-8357 230 Ball–bearing $39.95 $37.03
83-8358 250 Ball–bearing 44.95 41.15
83-8359 300 Ball–bearing 59.95 55.57
CoolerGiant
Silent Power
Supplies
CoolerGiant
series power
supply fan
adjustable series:
Dual fan and unique bottom blower for heat
dissipation, P4 ready. Retail box. Features: Meets
AMD K7, Intel ATX +12V 1.1 and ATX 2.03
version (Pentium 4 fully supported). Ultra cooling
design: One 9cm fan and bottom blower intakes
heat and one 8cm fan exhausts heat, AMD
recommended version. FMA function (fan speed
monitored by M/B and adjustable). 9cm thermal
control fan. Low noise. High MTBF.
Specifications: AC input: 115/230V, 50~60Hz,
10A/6A. DC output: +3.3V/34A; +5V/40A; +12V/16A;
-12V/0.8A; +5VSb/2.5A; +3.3V& 5V/280W. Total
power: 480W. Five IDE connectors, two floppy
connectors, two SATA connectors, one auxiliary
(video card) connector, one 3 pin connector, +12V
power connector, aux power connector.
Dimension: 150mm (W) x 86mm (H) x 140mm (D).
All specifications are for 480W version, check
with manufacturer for specifications of other sizes.
Order # Mfr. # Description (1-9) (10-up)
Power-Up!
83-10444 LC-B350ATX 350W single $26.99 $25.74
fan design
CoolerGiant Series
83-10446 EG435P-VHB 430W dual fan 89.95 87.95
and blower design
83-10447 EG485P-VHB 480W dual fan 99.95 97.95
and blower design
#83-10445
Liberty Series ATX Power Supplies
The Liberty™ series includes the newest technology,
modular cabling. These power supplies are also
packed with features like SATA connectors, dual
12V rails and a single 120mm fan for low noise.
Features: •Single 120mm fan •Meets ATX 12V V2.2
version specs •Gold plated connectors and tied cables
ensure neatness and high performance •Modular
cable design allows for cable management •MTBF
100,000 hours @ 25°C •Includes AC power cord
Specifications: •Input voltage: 100~240VAC,
50~60Hz •Output voltage: +3.3V, +5V, +12V1, +12V2,
-5V, -12V, +5Vsb •Internal cables: 400W 20+4P main,
two PCI-E cables, two IDE/SATA cables, one
SATA/floppy cable •Dimensions: 5.9" x 3.4" x 5.5"
Order # Wattage Mfr. # (ea)
83-10856 400W ELT400AWT $89.95
83-10857 500W ELT500AWT 125.00
83-10858 620W ELT620AWT 189.00
NoiseTaker P Series
ATX Power Supplies
The Noisetaker series
is built with nothing
in mind other than
performance and
silence. These power
supplies are packed
with new features
like SATA connectors,
onboard fan control
and dual 12V rails.
These power supplies
meet and exceed Intel’s
new ATX12V version 1.3 power supply design guide.
The very first of their kind to have dual +12V rails
that separate unwanted noise interference from your
CPU. They also include a unique fan delay circuit that
allows the fans to run an additional 2 minutes after
system shutdown to cool your PC. Features: •Dual
fan design •Meets ATX 2.03 and ATX +12V 1.3 version
specs •Gold plated connectors and tied cables ensure
neatness and high performance •Dual fan design with
motherboard thermal control •MTBF 100,000 hours @
25°C •Includes AC power cord and built in switch
Specifications: •Input voltage: 90~135/180~265VAC,
47~63Hz •Output voltage: 3.3V, +5V, +12V, -5V, -12V,
+5Vsb •Internal cables: ATX 20+4P, raid 12V cable,
12V P4, five CD-ROM and HDD, two floppy, two SATA
, AUX cable, fan and ATX cable •Dimensions:
5.9" x 3.4" x 5.5"
Order # Wattage Mfr. # (1-9) (10-up)
83-10060 375W EG375P-SFMA24P $72.95 $71.25
83-10061 425W EG425P-SFMA24P 84.95 82.95
83-10062 495W EG495P-SFMA24P 109.00 107.00
3 in 1, 24 Pin Power Supplies for Intel and AMD Systems
•Low noise and ultra cool thermal control power supply with
dual fans solution recommended by “AMD™ System Cooling Guidelines” •Copper
shielding tube on main power, +12V, AUX and extra +12V power connector for better
EMI reduction •Support dual Intel Xeon and AMD MP CPU server/workstation
board •FM function allows system to monitor power supply for 8cm fan rpm
•Thermal controlled 8cm and 9cm fan rpm auto adjusting bases on temp detected
inside power supply •Support Intel P4 and AMD XP and K8 CPU with enhanced
+12V output •+12V and aux power connector •Safety approvals: UL, cUL, TUV,
DEMKO, NEMKO,
SEMKO, FIMKO. •EMC
approvals: CE, FCC, and
CNS directives.
Order # Mfr. # Watts (1-9) (10-up)
83-9675 EG465P-VE FM 460 $94.95 $92.55
83-9676 EG651P-VE FM 550 169.95 164.55
C51 pg 570 8/3/06 10:55 AM Page 570