User guide

Advanced Setup

Wireless

To configure the 802.11g 54Mbps Router as a wireless access point

for wireless clients (either stationary or roaming), all you need to do

is define the radio channel, the Service Set Identifier (SSID), and

encryption options.

Channel and SSID

You must specify a common radio channel and SSID (Service Set ID)

to be used by the 802.11g 54Mbps Router and all of your wireless

clients. Be sure you configure all of your clients to the same values.

Network Name (SSID)

: The Service Set ID. This should be set to the

same value as the other wireless devices in your network. (Default:

USR5462)

Note: The SSID is case sensitive and can consist of up to 32

alphanumeric characters.