User guide

Configuring the 802.11g 54Mbps Router

WAN

Specify the WAN connection type provided by your Internet Service

Provider, then click More Configuration to enter detailed

configuration parameters for the selected connection type.

Dynamic IP

The Host Name is optional, but may be required by some ISPs. The

default MAC address is set to the WAN’s physical interface on the

802.11g 54Mbps Router. Use this address when registering for

Internet service, and do not change it unless required by your ISP. If

your ISP used the MAC address of an Ethernet adapter as an

identifier when first setting up your broadband account, only connect

the PC with the registered MAC address to the 802.11g 54Mbps

Router and click the Clone MAC Address button. This will replace the

current 802.11g 54Mbps Router MAC address with the already

registered Ethernet adapter MAC address. If you are unsure of which

PC was originally set up by the broadband technician, call your ISP

and request that they register a new MAC address for your account.