User manual

CLI Reference Guide 99
password Used if connection_type is no_prompt or
prompt_user_only.
protocol Protocol (ARAP or PPP) to connect with, if connection
type is direct_net. SLIP is not supported by direct_net
connection type.
TCP_port TCP port number for the login host. This parameter is
used when the connection type is direct_conn or
direct_net.
type Type of connections to allow on the switched interface.
• Login
port allows login users only
• Network
port allows network users only
• Login_network
allows either type
user_name Designation configured for the switched interface. This
parameter is used when connection type is no_prompt.