User manual

CLI Reference Guide 97
set switched interface <
interface_name
>
access [
DIAL_IN | DIAL_OUT | TWO_WAY
]
at_command
[string
]
connection_type [
DIRECT_CONN | NORMAL |
DIRECT_NET | NO_PROMPT |
PROMPT_USER_ONLY
]
dial_prefix [
string
]
filter_access [
ON | OFF
]
host_type [
PROMPT | SELECT | SPECIFIED
]
host_address [
IP name or address
]
init_script [
name
]
input_filter [
name
]
login_service [
TELNET | RLOGIN | CLEARTCP
]
message [
“login_message”
]
output_filter [
name
]
password [
string
]
prompt [
“prompt_message”
]
protocol [
ARAP | PPP | SLIP
]
TCP_port [
port_number
]
type [
NETWORK | LOGIN | LOGIN_NETWORK
]
user_name [
user name
]
Configures port parameters for the specified switched (modem) interface
(mod:1, e.g.). To see which switched interfaces you have configured, use
list
switched interfaces
. To see the settings for a particular interface, use
show
interface settings
.
Note
: When setting connection type, be aware that the
direct_net
parameter
does
not
support the
SLIP
protocol. Direct_net requires the use of a negotiated
protocol, which SLIP is not.
See table on the next page.