User manual

92
set login_host preference <
preference_number
>
rlogin_port [
port_number
]
telnet_port [
port_number
]
clearTCP_port [
port_number
]
Sets rlogin, TELNET or ClearTCP ports for a specified login host. The
specified port number is used by the login host to accept connections using
that method.
Parameters Description
<preference_number> Preferred rank of a login host. Use list login_hosts
to see the preference number associated with a
login host.
rlogin_port TCP port number you wish to configure for
RLOGIN access to the login host. If you do not
specify it here, and the user does not specify the
TCP port from the CLI rlogin command, then the
default is
513
.
telnet_port TCP port number you wish to configure for
TELNET access to the login host. If you do not
specify it here, and the user does not specify the
TCP port from the CLI TELNET command, then
the default is
23
.
clearTCP_port TCP port number you wish to configure for
ClearTCP access to the login host. There is no
default TCP port number.