User manual

CLI Reference Guide 91
sap_gap_timer Time the system should wait between sending
SAP packets. Default:
1
sap_packet_size
Size of SAP packets. Default:
510 bytes
sap_periodic Whether or not SAP will send periodic
updates. Default:
ENABLED
sap_nearest_replies Whether or not SAP will look its nearest
neighbors. Default:
YES
sap_update_interval How often RIP should send periodic updates.
Default:
60 seconds
set ipx system
name [
network_name
]
number [
internal network number
]
priority [
priority level
]
default_gateway [
ipx_host_add
]
initial_pool_address [
ipx_addr
]
pool_members [
number
]
Sets parameters for dynamic IPX networks. The maximum number of hops
allowed in
15
.
Parameters Description
<network_name> Designation for the dynamic IPX network.
number Internal number for the dynamic IPX network.
priority Priority for the dynamic IPX network.
default_gateway Default router for the dynamic IPX network.
initial_pool_address Initial IPX address used to dynamically assign IPX
network.
pool_members Number of addresses to reserve in the pool of IPX
addresses used when dynamically assigning IPX
networks.