User manual

90
Parameters Description
<network_name> Designation of the IPX network. Maximum
size:
32
characters.
delay_ticks Interval in number of ticks it takes to reach
this IPX network. Default:
1
for LAN
networks,
40
for WAN networks. Range:
0 -
65535
.
diagnostics Whether or not to send diagnostic packets to
this IPX network. Default:
ENABLED
maximum_learning_retries Number of times this network will resend
packets to learn its directly connected
neighbors. Default:
0
netbios Whether to support NetBIOS on dial-out IPX
networks. Default:
ENABLED
netbios_name_cache Whether or not to cache a list of the other
NetBIOS systems on this IPX network.
Default:
DISABLED
netbios_cache_timer Interval a NetBIOS system is kept in the
cache. Default:
60 seconds
netbios_max_hops Maximum number of hops this network will
make to locate a NetBIOS system. Default:
8.
Range:
0 - 65535
.
packet_maximum_size Maximum size packet that this IPX network
supports. Max size:
1600 bytes.
rip Turns RIP ON, OFF, AUTO_ON or
AUTO_OFF for this network. Default:
ON
rip_age_multiplier Number to multiply the rip_update_interval
by, to obtain the value for the aging out the
entries in the RIP database. Default:
4
rip_broadcast Enables, disables RIP broadcasts. Default:
ENABLED
rip_gap_timer Interval the system waits between sending RIP
packets. Default:
1
rip_packet_size
Size of RIP packets. Default:
446 bytes
rip_periodic Whether or not RIP sends periodic updates.
Default:
ENABLED
rip_update_interval How often RIP should send periodic updates.
Default:
60 seconds
sap_age_multiplier Number to multiply the sap_update_interval
by, to obtain the value for aging out entries in
the SAP database. Default
: 4
sap_broadcast Enables, disables SAP broadcasts. Default:
ENABLED