User manual

CLI Reference Guide 87
Parameters Description
<network_name> Designation of the IP network for which you want
to set parameters.
broadcast_algorithm Algorithm determines which address is used in
broadcasts to represent the entire network.
Choices are:
• 1
- the IETF standard, nnn.nnn.nnn.255
(default)
• 0
- the BSD standard, nnn.nnn.nnn.000
reassembly_maximum_
size
Maximum size IP datagram that the system will
try to reassemble, when the datagram has been
fragmented to fit in the network packet size.
Default:
3468
.
rip_authentication_key Text string used for RIPv2 authentication.
rip_policies_update Allows user to enable or disable RIP policies. See
text on the preceding page for description of
keywords. A keyword with a NO_ in front is used
to disable the policy. Default indicated by (
D
).
SEND_DEFAULT/NO_SEND_DEFAULT(
D
)
SEND_ROUTES(
D
)/NO_SEND_ROUTES
SEND_SUBNETS/NO_SEND_SUBNETS(
D
)
ACCEPT_DEFAULT/NO_ACCEPT_DEFAULT (
D
)
SPLIT_HORIZON(
D
)/NO_SPLIT_HORIZON
POISON_REVERSE(
D
)/ NO_POISON_REVERSE
FLASH_UPDATE(
D
)/NO_FLASH_UPDATE
SEND_COMPAT(
D
)/NO_RIPV1_SEND
RIPV1_RECEIVE(
D
)/NO_RIPV1_RECEIVE
RIPV2_RECEIVE(
D
)/NO_RIPV2_RECEIVE
SILENT (default is disabled)
routing_protocol Sets routing protocol to be used on IP network.
Choices are: no routing protocol, RIP version 1,
or RIP version 2.