User manual

spid <string> Service Profile ID provided by your phone supplier

for each B channel. SPIDs tell the phone company

of any special services you’ve ordered. Limit:

characters.

terminal_endpoint_id

The TEI permanently specifies your link with the

central office switch. The value range is

0-63

. This

number is assigned by the telco. Default:

. If you

aren’t assigned a TEI, it is specified dynamically.

switch Type of central office switch your ISDN line will

terminate, and which protocol will control your

calls:

ATT

- Running AT&T’s 5ESS Custom protocol.

DMS100

- Running Northern Telecom’s Custom

protocol.

NI1

- Running National ISDN, version 1, protocol.

NI2

- Running National ISDN, version 2, protocol.

set init_script <

script_name

> command <

“string”

Modifies an init_script, that you previously defined using

add init_script

. You

can see the currently defined initialization scripts using

list init_scripts

Parameters Description

<script_name> Designation for a modem initialization string. Maximum

size is

characters. If you are setting an init_script for a

modem pool or interface, the init_script name must already

exist.

command Modem initialization string must be entered with quotes,

and be less than

characters. The string must end with

the characters \\r\\n, which is interpreted by the system as

carriage return, newline.